KLOW Blend

The KLOW Blend combines GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg + KPV 10mg (total 80mg vial) for comprehensive skin, healing, and anti-inflammatory support. GHK-Cu is the primary component (~62.5%), driving collagen synthesis and cellular rejuvenation. BPC-157 and TB-500 (~12.5% each) provide healing and tissue repair support, while KPV (~12.5%) adds potent anti-inflammatory and gut health benefits. This four-peptide blend addresses skin vitality, inflammation, and metabolic health from a whole-body perspective.

Key Benefits

• Metabolic support 

• Skin texture improvement 

• Anti-inflammatory (KPV) • Gut health support (KPV + BPC-157) 

• Hair and nail health 

• Increased energy levels

Research Dosing Data

This is a blend product — a standard vial contains GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg + KPV 10mg (total 80mg). GHK-Cu is the primary component (~62.5%), with BPC-157 and TB-500 providing healing support (~12.5% each), and KPV adding anti-inflammatory/gut support (~12.5%). When you draw a dose, you receive all four components proportionally. For example, if you dose 1mg total: you get approximately 625mcg GHK-Cu + 125mcg BPC-157 + 125mcg TB-500 + 125mcg KPV. Start conservatively at the lowest recommended dose and titrate up over 1-2 weeks based on tolerance. Typical administration is once daily subcutaneously. Research cycles commonly run 8-12 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SKIN HEALTH / REJUVENATION

• 500mcg-1mg total blend daily, subcutaneous. 8-12 week cycles. GHK-Cu (~62.5%) stimulates collagen production and improves skin elasticity, while KPV reduces inflammation that accelerates skin aging.

• HAIR / NAIL HEALTH

• 500mcg-1mg total blend daily, subcutaneous. 12+ week cycles. GHK-Cu activates hair follicle stem cells and supports keratin production for hair and nail health. TB-500 promotes cellular migration for enhanced growth.

• ANTI-INFLAMMATORY

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. KPV is a potent anti-inflammatory peptide that modulates NF-kB pathways, complemented by BPC-157 and TB-500's anti-inflammatory properties for comprehensive inflammation management.

• GUT HEALTH

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. KPV provides gut-specific anti-inflammatory support while BPC-157 promotes gut lining repair and barrier integrity. Together they address gut inflammation from multiple pathways.

• WOUND HEALING

• 500mcg-1mg daily, subcutaneous near wound area. 4-8 weeks. GHK-Cu accelerates tissue remodeling, BPC-157 promotes angiogenesis, and TB-500 enhances cell migration for comprehensive wound repair.

• JOINT SUPPORT

• 500mcg-1mg daily, subcutaneous. 6-8 weeks. BPC-157 and TB-500 components provide localized and systemic healing for joints and connective tissue, while KPV reduces joint inflammation.

• ANTI-AGING / CELLULAR REJUVENATION

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. The four-peptide blend addresses multiple aspects of aging — collagen synthesis, antioxidant support, inflammation reduction, and systemic tissue repair.

• METABOLIC OPTIMIZATION

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. The blend supports cellular energy metabolism and reduces systemic inflammation that impairs metabolic function, bridging metabolic optimization with cosmetic enhancement.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 8ml of Bacteriostatic Water per 80mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Temporary redness 

• Appetite changes

Not Medical Advice

Ipamorelin

Ipamorelin is a highly selective pentapeptide growth hormone secretagogue (GHS) that mimics ghrelin and binds to the ghrelin receptor in the brain, triggering growth hormone release from the pituitary gland. Unlike other GH secretagogues, Ipamorelin does not significantly affect cortisol, prolactin, or aldosterone levels, making it one of the cleanest and most tolerable options for GH optimization research. Its selectivity results in more predictable, pulse-like GH release patterns.

Key Benefits

• Increased muscle growth 

• Improved sleep quality 

• Fat loss • Anti-aging effects

Research Dosing Data

Common dosage is 100mcg to 300mcg daily, typically taken before bed on an empty stomach. Begin at 100mcg nightly to assess tolerance, then titrate up by 50-100mcg increments every few days until reaching the desired response (up to 300mcg). Best administered 30-60 minutes before sleep for optimal GH pulse alignment. Often paired with CJC-1295 for synergistic effects. (Not Medical Advice)

Possible Uses & Dosing by Goal

• ANTI-AGING / GENERAL WELLNESS

• 100-200mcg nightly before bed. 3-6 month cycles. Supports natural GH pulsatility during sleep for skin, recovery, and overall vitality.

• FAT LOSS

• 200-300mcg nightly, combined with fasted state. 3-6 month cycles. Best paired with CJC-1295 (No DAC) for amplified GH release and enhanced fat oxidation.

• MUSCLE GROWTH / RECOVERY

• 200-300mcg twice daily (morning + bedtime), fasted. 3-6 months. Combine with CJC-1295 for synergistic anabolic effects.

• SLEEP OPTIMIZATION

• 100-200mcg 30-60 minutes before bed. Ongoing use. Ipamorelin enhances deep sleep phases by aligning with natural GH pulses.

• SKIN / HAIR / NAILS

• 100-200mcg nightly before bed. 3-6 month cycles. GH release supports collagen and keratin production, improving skin elasticity, hair thickness, and nail strength over time.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.2ml of Bacteriostatic Water per 2mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Water retention • Increased hunger • Numbness/tingling in extremities

Not Medical Advice

IGF-1 LR3

IGF-1 LR3 (Long R3 Insulin-like Growth Factor-1) is an 83-amino acid analog of human IGF-1 with an arginine substitution at position 3 and a 13-amino acid N-terminal extension. These modifications reduce binding to IGF-binding proteins (IGFBPs), dramatically increasing its half-life from 12 minutes to 20-30 hours and enhancing bioavailability. It promotes muscle hyperplasia (the creation of new muscle cells) rather than just hypertrophy, representing one of the most potent anabolic compounds researched.

Key Benefits

• Muscle hyperplasia (new muscle cell creation) 

• Improved nutrient partitioning 

• Enhanced recovery 

• Muscle mass preservation

Research Dosing Data

Common research dosages are 20mcg to 50mcg daily, often used post-workout during the anabolic window. Start at 20mcg daily to assess tolerance and monitor blood sugar levels, as hypoglycemia is a significant risk. Titrate up by 10mcg increments every few days (max 50mcg). Administer bilaterally into target muscle groups for localized effects, or subcutaneously for systemic action. Cycles typically run 4-6 weeks on, 4 weeks off. (Not Medical Advice)

Possible Uses & Dosing by Goal

• MUSCLE HYPERPLASIA

• 30-50mcg daily, administered bilaterally into target muscle groups post-workout. 4-6 weeks on, 4 weeks off. IGF-1 LR3 promotes the creation of new muscle cells (hyperplasia) rather than just enlargement of existing cells.

• RECOVERY / TISSUE REPAIR

• 20-40mcg daily, subcutaneous for systemic action. 4-6 week cycles. Enhanced IGF-1 signaling accelerates recovery from intense training and supports connective tissue repair.

• NUTRIENT PARTITIONING

• 20-50mcg daily, post-workout. 4-6 weeks on, 4 weeks off. Improves how the body allocates nutrients toward muscle tissue vs. fat storage. Monitor blood sugar carefully as hypoglycemia is a significant risk.

Mixing Instructions

Reconstitute with Acetic Acid for stability, then dilute with Bacteriostatic Water if needed. A typical reconstitution uses 0.1ml of solution per 1mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Hypoglycemia (low blood sugar) 

• Joint pain 

• Organs enlargement (with excessive use)

Not Medical Advice

AOD-9604

AOD-9604 (Anti-Obesity Drug) is a modified 16-amino acid fragment corresponding to the C-terminal portion of human growth hormone (amino acids 177-191) with an added tyrosine at the N-terminus. It retains the fat-reducing properties of HGH without affecting blood sugar or cell proliferation. Research demonstrates it stimulates lipolysis (fat breakdown) and inhibits lipogenesis (fat formation) through beta-3 adrenergic receptors. It has received GRAS (Generally Recognized as Safe) status from the FDA for use in food products.

Key Benefits

• Stimulates lipolysis (fat burning) 

• Inhibits lipogenesis (fat storage) 

• No effect on blood sugar or IGF-1 levels

Research Dosing Data

Common dosage is 300mcg to 500mcg daily, taken in the morning on an empty stomach. Start at 300mcg daily for the first week to assess tolerance, then titrate to 500mcg if well-tolerated. Best results are seen when administered fasted (at least 30 minutes before eating). Research cycles typically run 12-20 weeks. Often stacked with other fat-loss peptides for synergistic effects. (Not Medical Advice)

Possible Uses & Dosing by Goal

• TARGETED FAT LOSS

• 300-500mcg daily, morning fasted administration. 12-20 week cycles. AOD-9604 stimulates lipolysis and inhibits lipogenesis without affecting blood sugar or IGF-1 levels. Best results with consistent fasted dosing.

• METABOLIC SUPPORT

• 300-500mcg daily, subcutaneous. 12-20 weeks. Can be stacked with other fat-loss peptides (MOTS-c, 5-Amino-1MQ) for synergistic metabolic effects. Has GRAS status from the FDA.

Mixing Instructions

Reconstitute with Acetic Acid for stability, then dilute with Bacteriostatic Water if needed. A typical reconstitution uses 0.2ml of solution per 2mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Headache 

• Nausea 

• Injection site pain

Not Medical Advice

ARA-290

ARA-290 (Cibinetide) is an 11-amino acid peptide derived from the structure of erythropoietin (EPO). Unlike EPO, ARA-290 is designed to selectively activate the innate repair receptor (IRR) without stimulating red blood cell production. It has been studied for its potential role in reducing inflammation, promoting tissue repair, and supporting nerve regeneration. Research has investigated ARA-290 in models of neuropathic pain, small fiber neuropathy, wound healing, and inflammatory conditions.

Key Benefits

• Supports tissue repair research

• May reduce inflammation

• Studied for nerve regeneration and neuropathy support

Research Dosing Data

Common research dosing ranges from 2mg to 4mg daily, administered via subcutaneous injection. Research protocols frequently utilize 2-8 week cycles, depending on the study objective. Due to ARA-290's relatively short half-life, some protocols investigate daily administration to maintain receptor activity. Human dosing has not been established outside of clinical research. (Not Medical Advice)

Possible Uses & Dosing by Goal

• NERVE HEALTH / NEUROPATHY

• 2-4mg daily for 4-8 weeks. Clinical and preclinical research has explored ARA-290 for supporting nerve repair and reducing symptoms associated with small fiber neuropathy through activation of the innate repair receptor.

• INFLAMMATION SUPPORT

• 2-4mg daily for 2-6 weeks. Research suggests ARA-290 may modulate inflammatory signaling and reduce pro-inflammatory cytokine activity while promoting tissue recovery.

• TISSUE REPAIR & RECOVERY

• 2-4mg daily during the recovery period. Studies have investigated ARA-290's ability to activate natural tissue repair pathways following injury or inflammation without affecting hematocrit.

• WOUND HEALING

• 2mg daily for 2-4 weeks. Experimental models have examined ARA-290 for its potential to support vascular integrity, cellular repair, and tissue regeneration during wound healing.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 1mL of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/mL. Water volume may be adjusted based on the preferred concentration: more water creates a lower concentration for easier measurement of smaller doses, while less water results in a higher concentration and smaller injection volumes. Use a peptide calculator to determine the appropriate units.

Possible Side Effects

• Mild injection site irritation

• Temporary redness or swelling

• Headache

• Nausea

Not Medical Advice

AHK-Cu

AHK-Cu (Alanine-Histidine-Lysine Copper) is a naturally occurring copper-binding tripeptide studied for its potential role in skin regeneration, hair follicle biology, and tissue repair. It belongs to the family of copper peptides that interact with cellular signaling pathways involved in wound healing, extracellular matrix remodeling, and gene expression. Preclinical research suggests AHK-Cu may support collagen production, promote healthy hair follicle activity, and help maintain skin structure, though human research remains limited.

Key Benefits

• Supports skin regeneration research

• May promote healthy collagen production

• Studied for hair follicle support

Research Dosing Data

Common research dosing ranges from 1mg to 2mg daily, administered via subcutaneous injection near the area being studied or as directed by the research protocol. Many research protocols utilize 4-8 week cycles, followed by a break to evaluate results. Human dosing data remain limited, and optimal dosing has not been established. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SKIN REJUVENATION

• 1-2mg daily for 4-8 weeks. AHK-Cu has been investigated for its effects on collagen synthesis, extracellular matrix remodeling, and skin repair pathways involved in maintaining healthy skin appearance.

• HAIR SUPPORT

• 1-2mg daily for 8-12 weeks. Laboratory research suggests AHK-Cu may influence hair follicle activity and growth factor signaling associated with healthy hair growth.

• WOUND HEALING RESEARCH

• 1mg daily during the observation period. Preclinical studies have explored AHK-Cu's role in tissue regeneration, cellular migration, and wound repair processes.

• COLLAGEN & TISSUE SUPPORT

• 1-2mg daily for 4-8 weeks. Research indicates AHK-Cu may stimulate pathways involved in collagen production and extracellular matrix maintenance that contribute to healthy connective tissue.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.5mL of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/mL. Water volume may be adjusted to achieve the desired concentration: more water results in a lower concentration (making smaller doses easier to measure), while less water creates a higher concentration with smaller injection volumes. Use a peptide calculator to determine the appropriate units.

Possible Side Effects

• Mild injection site irritation

• Temporary redness or swelling

• Mild headache

Not Medical Advice

HMG

Human Menopausal Gonadotropin (HMG) is a purified preparation containing both Luteinizing Hormone (LH) and Follicle-Stimulating Hormone (FSH) derived from post-menopausal urine. This combination of gonadotropins directly stimulates the gonads: FSH promotes spermatogenesis and follicular development, while LH triggers testosterone production and ovulation. In research contexts, HMG is studied for its ability to maintain or restore testicular function, particularly during or after protocols that may suppress the hypothalamic-pituitary-gonadal (HPG) axis.

Key Benefits

• Stimulates natural hormone production 

• Enhances fertility research 

• Supports recovery of HPTA axis

Research Dosing Data

Dosage varies widely based on specific research protocol, typically 75 IU to 150 IU administered 2-3 times per week via intramuscular injection. Start at the lower end (75 IU) and titrate based on lab results monitoring LH, FSH, and testosterone levels. Protocols often run 4-8 weeks. Some researchers use every-other-day dosing for steadier hormonal levels. Always monitor response through bloodwork before adjusting dose. (Not Medical Advice)

Possible Uses & Dosing by Goal

• HORMONE RECOVERY / HPTA RESTORATION

• 75-150 IU, 2-3 times weekly via intramuscular injection. 4-8 week cycles with bloodwork monitoring. HMG directly stimulates the gonads with both LH and FSH, supporting recovery of testicular function after hormonal suppression.

• FERTILITY SUPPORT

• 75-150 IU, 2-3 times weekly. 4-8 weeks. FSH component promotes spermatogenesis while LH supports testosterone production, making it valuable for fertility-focused protocols.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 75 IU vial (standard clinical protocol). This yields a concentration suitable for IM administration. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Abdominal pain 

• Headache 

• Injection site reaction

Not Medical Advice

Glutathione

Glutathione (GSH) is a tripeptide composed of glutamate, cysteine, and glycine, serving as the body's master antioxidant and primary detoxification molecule. Present in every cell, it neutralizes free radicals, regenerates other antioxidants (vitamins C and E), and conjugates toxins for elimination via the liver. Glutathione levels decline with age, stress, and toxic exposure. Injectable forms bypass digestive breakdown, achieving significantly higher cellular concentrations than oral supplementation for enhanced detoxification and immune support.

Key Benefits

• Reduces oxidative stress 

• Improves skin complexion 

• Supports immune function 

• Detoxifies the liver

Research Dosing Data

Common research dosages range from 200mg to 600mg, often administered via IV push or subcutaneous injection for best absorption. Start at 200mg to assess tolerance, then titrate up to 400-600mg as needed. Can be administered 2-3 times per week for ongoing support, or daily during acute protocols. IV administration provides the highest bioavailability. Oral forms are poorly absorbed unless liposomal. (Not Medical Advice)

Possible Uses & Dosing by Goal

• DETOXIFICATION / LIVER SUPPORT

• 400-600mg IV or subcutaneous, 2-3 times weekly. 4-8 week cycles. Glutathione is the body's master detoxification molecule, conjugating toxins for elimination via the liver.

• SKIN BRIGHTENING / COMPLEXION

• 400-600mg IV or subcutaneous, 2-3 times weekly. 8-12 weeks. Research shows glutathione inhibits melanin synthesis, resulting in gradual skin brightening and more even complexion.

• IMMUNE SUPPORT

• 200-400mg subcutaneous, 2-3 times weekly. Ongoing use during illness or immune challenges. Supports natural killer cell activity and overall immune competence.

• LIVER HEALTH

• 400-600mg subcutaneous or IV, 2-3 times weekly. 4-12 weeks. Critical for Phase II liver detoxification and protecting hepatocytes from oxidative damage.

Mixing Instructions

Reconstitute with Sterile Water or Bacteriostatic Water. A typical reconstitution uses 60ml of Sterile or Bacteriostatic Water per 600mg vial, yielding a concentration of 10mg/ml (suitable for IV infusion). You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Abdominal cramps 

• Bloating 

• Allergic reactions (rash)

Not Medical Advice

GLOW Blend

The GLOW Blend combines GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg (total 70mg vial) for comprehensive skin, hair, and healing support. GHK-Cu is the primary component (~71%), driving collagen synthesis, skin rejuvenation, and hair follicle activation. BPC-157 and TB-500 (~14% each) add powerful tissue healing, anti-inflammatory, and joint support properties. This synergistic combination addresses skin health, wound healing, and connective tissue repair through multiple complementary mechanisms.

Key Benefits

• Enhanced skin elasticity 

• Promotes thick, healthy hair 

• Cellular rejuvenation 

• Radiant complexion 

• Wound healing support 

• Joint and tissue repair

Research Dosing Data

This is a blend product — a standard vial contains GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg (total 70mg). The GHK-Cu is the primary component (~71% of the vial), with BPC-157 and TB-500 as supporting healing peptides (~14% each). When you draw a dose, you receive all three components proportionally — no need to calculate each separately. For example, if you dose 1mg total: you receive approximately 714mcg GHK-Cu + 143mcg BPC-157 + 143mcg TB-500. Start at the lowest recommended dose for the first week to assess tolerance, then titrate up gradually. Typical administration is once daily subcutaneously. Research cycles commonly run 8-12 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SKIN HEALTH / REJUVENATION

• 500mcg-1mg total blend daily, subcutaneous. 8-12 week cycles. GHK-Cu (~71%) stimulates collagen production and improves skin elasticity, texture, and radiance, while BPC-157 and TB-500 provide additional tissue healing support.

• HAIR GROWTH / THICKNESS

• 500mcg-1mg total blend daily, subcutaneous. 12+ week cycles. GHK-Cu activates hair follicle stem cells while TB-500 promotes cellular migration for thicker, healthier hair growth through multiple pathways.

• ANTI-AGING / CELLULAR REJUVENATION

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. The blend addresses multiple aspects of aging simultaneously — collagen synthesis (GHK-Cu), antioxidant support, and systemic tissue repair (BPC-157 + TB-500).

• WOUND HEALING

• 500mcg-1mg daily, subcutaneous near wound area. 4-8 weeks. GHK-Cu accelerates tissue remodeling while BPC-157 promotes angiogenesis and TB-500 enhances cell migration for comprehensive wound repair.

• NAIL HEALTH

• 500mcg-1mg daily, subcutaneous. 8-12 weeks. GHK-Cu supports keratin production and nail bed health through collagen and growth factor stimulation.

• JOINT / TISSUE SUPPORT

• 500mcg-1mg daily, subcutaneous. 6-8 weeks. BPC-157 and TB-500 components provide localized and systemic healing for joints and connective tissue, while GHK-Cu supports cartilage remodeling.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 7ml of Bacteriostatic Water per 70mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Mild nausea 

• Flushing 

• Injection site sensitivity

Not Medical Advice

GHK-CU

GHK-Cu (Copper Peptide) is a naturally occurring tripeptide with a high affinity for copper ions, found in human plasma, saliva, and urine. Levels decline significantly with age (from 200 ng/ml at age 20 to 80 ng/ml by age 60). Research shows it remodels damaged tissue by activating genes involved in collagen synthesis, anti-oxidant responses, and stem cell markers. It's considered one of the most effective compounds for skin rejuvenation, wound healing, and hair follicle stimulation at the cellular level.

Key Benefits

• Stimulates collagen and elastin production

 • Accelerates wound healing 

• Improves skin elasticity 

• Promotes hair growth and thickness

Research Dosing Data

Common research dosages range from 1mg to 2mg daily via subcutaneous injection. Start at 1mg daily for the first week to assess tolerance, then increase to 2mg if needed. Can also be used topically in cream form at higher concentrations for localized skin and hair benefits. Research cycles typically run 8-12 weeks. Some protocols alternate 5 days on, 2 days off. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SKIN REJUVENATION / ANTI-AGING

• 1-2mg daily, subcutaneous. 8-12 week cycles. Stimulates collagen and elastin for firmer, more youthful skin. Often combined with topical application.

• HAIR GROWTH / THICKNESS

• 1-2mg daily, subcutaneous. 12+ week cycles. GHK-Cu activates hair follicle stem cells. Can be combined with topical copper peptide serums for dual action.

• WOUND HEALING

• 2mg daily, subcutaneous near wound area. 4-8 weeks. Accelerates tissue remodeling and reduces scarring.

• JOINT / TISSUE REPAIR

• 1-2mg daily, 8-12 weeks. Supports cartilage and connective tissue remodeling via collagen synthesis pathways.

• NAIL HEALTH

• 1-2mg daily, subcutaneous. 8-12 weeks. GHK-Cu supports keratin production and nail bed health through collagen and growth factor stimulation, promoting stronger, healthier nails.

• SCAR REDUCTION

• 1-2mg daily, subcutaneous near scar tissue. 8-12 weeks. GHK-Cu promotes tissue remodeling and collagen reorganization, reducing the appearance of scars and supporting healthy skin regeneration.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 5ml of Bacteriostatic Water per 50mg vial, yielding a concentration of 10mg/ml. Sensitive to pH; avoid mixing with highly acidic solutions. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Injection site pain/irritation • Localized redness • Metallic taste (rare)

Not Medical Advice

Epitalon

Epitalon (Epithalamin) is a synthetic tetrapeptide (Ala-Glu-Asp-Gly) based on the natural pineal gland peptide epithalamin, developed by Russian scientist Dr. Vladimir Khavinson. It activates telomerase, the enzyme responsible for maintaining telomere length at chromosome ends. Telomere shortening is a fundamental mechanism of cellular aging; by stimulating telomerase, Epitalon may extend cellular replicative capacity. Research also shows it regulates melatonin production, normalizes circadian rhythms, and has demonstrated life-extending effects in animal models.

Key Benefits

• Promotes telomere lengthening 

• Regulates circadian rhythms 

• Anti-aging properties

Research Dosing Data

Various protocols exist, often involving 5-10mg daily for 10-15 days, repeated once or twice per year. Start at 5mg daily for the first cycle. Administer subcutaneously, rotating injection sites. The cyclical dosing pattern (10-15 days on, then months off) is based on original research showing sustained telomerase activation even after the peptide clears. Some protocols add a second short cycle 4-6 months later. (Not Medical Advice)

Possible Uses & Dosing by Goal

• TELOMERE SUPPORT / LONGEVITY

• 5-10mg daily for 10-15 days, repeated 1-2 times per year. Epitalon activates telomerase, the enzyme that maintains telomere length at chromosome ends. Cyclical dosing produces sustained effects even after the peptide clears.

• ANTI-AGING

• 5-10mg daily for 10-15 days, 1-2 cycles per year. Research shows Epitalon supports cellular replicative capacity and has demonstrated life-extending effects in animal models.

• CIRCADIAN RHYTHM REGULATION

• 5-10mg daily for 10-15 days. Epitalon regulates melatonin production via the pineal gland, helping normalize circadian rhythms and improve sleep-wake cycles.

• SKIN / HAIR

• 5-10mg daily for 10-15 days, 1-2 cycles per year. By activating telomerase and extending cellular replicative capacity, Epitalon indirectly supports skin cell renewal, hair follicle vitality, and overall tissue rejuvenation at the cellular level.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Rare mild headache 

• Temporary changes in sleep patterns

Not Medical Advice

DSIP

Delta Sleep-Inducing Peptide (DSIP) is a naturally occurring nine-amino acid neuropeptide first isolated from rabbit brain tissue during induced sleep states. It modulates sleep architecture by promoting delta wave (slow-wave) sleep, the deepest and most restorative sleep phase critical for physical recovery, immune function, and memory consolidation. Research shows DSIP also influences stress response via ACTH modulation, demonstrates analgesic properties, and may help normalize disrupted circadian rhythms and sleep-wake cycles.

Key Benefits

• Improves sleep quality and depth 

• Reduces stress and anxiety 

• Supports hormonal balance

Research Dosing Data

Common dosage is 100mcg to 250mcg daily, administered 30-60 minutes before bed via subcutaneous injection. Start at 100mcg nightly for the first week, then titrate up by 50mcg increments every few days until reaching the desired sleep improvement (up to 250mcg). Effects on sleep quality are typically noticed within the first few days. Research cycles often run 2-4 weeks on, followed by a break to assess baseline. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SLEEP QUALITY / DEEP SLEEP

• 100-250mcg nightly, 30-60 minutes before bed. 2-4 weeks on, 1-2 weeks off. DSIP promotes delta wave (slow-wave) sleep, the deepest and most restorative sleep phase critical for physical recovery and memory consolidation.

• STRESS REDUCTION

• 100-200mcg nightly. 2-4 week cycles. DSIP modulates ACTH and stress response pathways, helping normalize the stress-sleep cycle.

• HORMONAL BALANCE

• 100-250mcg nightly. 2-4 weeks on, break, repeat. Research shows DSIP supports normalized circadian rhythms and sleep-wake cycles, which are foundational to healthy hormone regulation.

• RECOVERY SUPPORT

• 100-250mcg nightly, 30-60 minutes before bed. 2-4 week cycles. Deep delta-wave sleep is critical for physical recovery, growth hormone release, and tissue repair. DSIP optimizes this restorative sleep phase for enhanced recovery.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Morning grogginess 

• Mild headache

Not Medical Advice

CJC-1295/Ipamorelin Blend

The CJC-1295/Ipamorelin Blend combines a GHRH analog with a ghrelin mimetic for amplified, physiological growth hormone release. CJC-1295 (No DAC) primes the pituitary by increasing the amplitude of GH pulses, while Ipamorelin triggers the actual release. This dual-pathway approach produces synergistic effects: research shows the combination generates significantly higher GH output than either peptide alone, while maintaining natural pulsatile patterns and avoiding the cortisol and prolactin elevations seen with less selective secretagogues.

Key Benefits

• Synergistic growth hormone release 

• Improved muscle recovery and growth 

• Enhanced fat loss • Improved sleep quality

Research Dosing Data

This is a blend product available in three vial sizes: 5/5 (5mg CJC-1295 No DAC + 5mg Ipamorelin = 10mg total), 5/10 (5mg CJC-1295 + 10mg Ipamorelin = 15mg total), and 10/10 (10mg CJC-1295 + 10mg Ipamorelin = 20mg total). All maintain proportional dosing — when you draw a dose, you receive both peptides at the vial's ratio. For the 5/5 vial (1:1 ratio), a 200mcg dose gives ~100mcg CJC-1295 + 100mcg Ipamorelin. For the 5/10 vial (1:2 ratio), a 200mcg dose gives ~67mcg CJC-1295 + 133mcg Ipamorelin. For the 10/10 vial (1:1 ratio), a 200mcg dose gives ~100mcg each. No need to calculate each peptide separately. Start with 200mcg total once nightly (before bed) for the first week, then titrate to twice daily (morning and bedtime) if well-tolerated. The most important dose is at bedtime to maximize the natural GH pulse during sleep. Allow at least 1 hour of fasting before and after each dose. Cycles can run continuously for 3-6 months. (Not Medical Advice)

Possible Uses & Dosing by Goal

• GH OPTIMIZATION

• 200-300mcg total blend (≈100-150mcg each peptide for 5/5 vial), 1-3 times daily. Most important dose at bedtime. 3-6 month cycles. CJC-1295 amplifies GH pulse amplitude while Ipamorelin triggers release — synergistic effect produces significantly higher GH output than either alone.

• FAT LOSS

• 200-300mcg total blend, 2-3 times daily, fasted. 3-6 months. Combined GH release enhances lipolysis, especially during sleep and morning fasted periods. Pair with fasted cardio for best results.

• ANTI-AGING / LONGEVITY

• 200mcg total blend nightly before bed. Long-term use (3-6 months+). Supports skin, hair, sleep quality, and overall vitality through enhanced natural GH pulsatility.

• SLEEP OPTIMIZATION

• 200-300mcg total blend 30-60 minutes before bed, fasted. Ongoing use. The blend enhances deep sleep phases by amplifying and triggering natural nocturnal GH pulses through dual pathways.

• MUSCLE RECOVERY / GROWTH

• 200-300mcg total blend, 2-3 times daily (post-workout and bedtime). 3-6 months. Synergistic GH release supports muscle repair, protein synthesis, and lean mass gains.

• SKIN / HAIR / NAILS

• 200mcg total blend nightly before bed. 3-6 month cycles. Enhanced GH pulsatility supports collagen production, keratin synthesis, and overall skin elasticity for visible improvements in skin, hair, and nail quality.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Flushing 

• Headache 

• Injection site reaction 

• Increased hunger

Research Tools

Calculate reconstitution and dosing for CJC-1295/Ipamorelin Blend.

Not Medical Advice

CJC-1295 (w/DAC)

CJC-1295 with Drug Affinity Complex is a long-acting GHRH analog that binds to albumin in the bloodstream, extending its half-life to approximately 6-8 days. This modification allows for once-weekly dosing while maintaining elevated baseline GH and IGF-1 levels. Unlike the non-DAC version, it creates a sustained GH elevation rather than pulsatile release, which may be preferable for certain research applications but differs from the body's natural secretion patterns.

Key Benefits

• Sustained GH release 

• Improved muscle recovery 

• Deep sleep enhancement 

• Fat loss support

Research Dosing Data

Common dosage is 2mg once weekly due to its long 6-8 day half-life. Start at 1mg once weekly for the first 1-2 weeks to assess tolerance, then titrate to 2mg weekly. Unlike the non-DAC version, this provides sustained baseline GH elevation rather than pulsatile release. Administer on the same day each week for consistent levels. Do not combine with the non-DAC version. (Not Medical Advice)

Possible Uses & Dosing by Goal

SUSTAINED GH ELEVATION

2mg once weekly. 3-6 month cycles. Provides constant baseline GH and IGF-1 elevation, unlike the pulsatile release of the non-DAC version.

FAT LOSS / BODY COMPOSITION

2mg weekly. 3-6 months. Sustained GH levels promote ongoing lipolysis and lean mass support.

ANTI-AGING / LONGEVITY

1-2mg weekly. Long-term use. Supports skin, hair, sleep, and recovery through consistent IGF-1 elevation.

MUSCLE RECOVERY

2mg weekly. 3-6 month cycles. Sustained GH and IGF-1 elevation supports continuous muscle repair, protein synthesis, and recovery between training sessions.

SKIN / HAIR / NAILS

1-2mg weekly. 3-6 month cycles. Consistent IGF-1 elevation promotes collagen production, keratin synthesis, and cellular turnover for improved skin elasticity, hair growth, and nail strength.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.2ml of Bacteriostatic Water per 2mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Facial flushing 

• Injection site itchiness

 • Water retention

Not Medical Advice

CJC-1295 (No DAC)

CJC-1295 without Drug Affinity Complex (also known as Mod GRF 1-29) is a synthetic analog of Growth Hormone Releasing Hormone (GHRH) consisting of the first 29 amino acids of GHRH with four amino acid substitutions to prevent degradation. It works synergistically with ghrelin mimetics like Ipamorelin to amplify natural GH pulses. Without DAC, it has a shorter half-life of approximately 30 minutes, allowing for more physiological pulsatile GH release patterns.

Key Benefits

• Increases plasma GH concentrations 

• Improved recovery 

• Better sleep

Research Dosing Data

Often dosed at 100mcg per injection, combined with Ipamorelin. When used alone, doses range from 100-200mcg. When stacked with Ipamorelin, 100mcg of each is a common starting point. Administer on an empty stomach (no food 1 hour before or after). Can be taken 1-3 times daily, with the most important dose at bedtime. Titrate based on response and tolerance. (Not Medical Advice)

Possible Uses & Dosing by Goal

• GH OPTIMIZATION (with Ipamorelin)

• 100mcg CJC + 100mcg Ipamorelin, 1-3 times daily. Most important dose at bedtime. 3-6 month cycles. This is the most popular research combination.

• FAT LOSS

• 100-200mcg 2-3 times daily, fasted. Pair with Ipamorelin for enhanced lipolysis during sleep and morning fasted periods.

• MUSCLE RECOVERY

• 100-200mcg post-workout and at bedtime. Amplifies the natural GH surge that supports muscle repair.

• ANTI-AGING

• 100mcg nightly before bed, alone or with Ipamorelin. Long-term use (3-6 months) to support skin, hair, and overall vitality.

• SKIN / HAIR / NAILS

• 100-200mcg nightly before bed. 3-6 month cycles. Enhanced GH secretion supports collagen synthesis, keratin production, and cellular turnover for improved skin, hair, and nail quality.

• SLEEP OPTIMIZATION

• 100-200mcg 30-60 minutes before bed, fasted. Ongoing use. CJC-1295 (No DAC) amplifies natural nocturnal GH pulses, enhancing deep sleep phases critical for recovery and regeneration.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.2ml of Bacteriostatic Water per 2mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Flushing

 • Headache 

• Injection site reaction

Not Medical Advice

BPC-157/TB-500 Blend

The BPC-157/TB-500 Blend combines two of the most researched healing peptides for synergistic tissue repair. BPC-157 works through VEGF promotion and nitric oxide pathways, while TB-500 operates via actin upregulation and cell migration. Together, they address healing from complementary angles: BPC-157 excels at localized tendon, ligament, and gut healing, while TB-500 provides systemic anti-inflammatory and regenerative effects. This combination is particularly researched for complex injuries requiring both local and systemic intervention.

Key Benefits

• Combined healing power for tendons and ligaments 

• Reduced recovery time 

• Systemic anti-inflammatory effects

Research Dosing Data

This is a blend product available in three vial sizes: 5/5 (5mg BPC-157 + 5mg TB-500 = 10mg total), 5/10 (5mg BPC-157 + 10mg TB-500 = 15mg total), and 10/10 (10mg BPC-157 + 10mg TB-500 = 20mg total). All maintain proportional dosing — when you draw a dose, you receive both peptides at the vial's ratio. For the 5/5 vial (1:1 ratio), a 500mcg dose gives ~250mcg BPC-157 + 250mcg TB-500. For the 5/10 vial (1:2 ratio), a 500mcg dose gives ~167mcg BPC-157 + 333mcg TB-500. For the 10/10 vial (1:1 ratio), a 500mcg dose gives ~250mcg each. No need to calculate each peptide separately. For acute injuries, 250-500mcg total blend daily is common; for maintenance, 250-500mcg 2-3 times per week. Start at 250mcg daily for the first week and titrate up based on response. The BPC-157 component works best near the injury site, while TB-500 acts systemically regardless of injection location. Typical cycles run 4-8 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• INJURY RECOVERY (Tendon/Ligament/Muscle)

• 500mcg total blend daily (≈250mcg BPC-157 + 250mcg TB-500 for 5/5 vial), subcutaneous near injury site. 6-8 week cycles. BPC-157 provides localized healing via VEGF and NO pathways, while TB-500 delivers systemic repair through actin upregulation.

• JOINT REPAIR / CHRONIC ISSUES

• 250-500mcg total blend daily, subcutaneous near affected joint. 6-8 weeks. The dual-peptide approach addresses both localized joint damage and systemic inflammation simultaneously.

• POST-SURGICAL RECOVERY

• 500mcg total blend daily (≈250mcg each for 5/5 vial), starting post-surgery for 4-6 weeks, then reduce to 250mcg 2-3 times weekly for maintenance. Comprehensive healing from complementary mechanisms.

• GUT HEALING (BPC-157 Component)

• 250-500mcg total blend daily, subcutaneous abdominal area. 4-8 weeks. The BPC-157 component provides gut lining repair and barrier integrity support, while TB-500 adds systemic anti-inflammatory effects.

• FLEXIBILITY / MOBILITY (TB-500 Component)

• 250-500mcg total blend daily, subcutaneous. 4-6 weeks. TB-500 increases flexibility by promoting cellular migration and reducing adhesions in connective tissue, while BPC-157 supports localized tissue repair.

• NERVE DAMAGE SUPPORT

• 250-500mcg total blend daily, subcutaneous. 4-8 weeks. BPC-157 demonstrates neuroprotective properties through nitric oxide modulation, complemented by TB-500's systemic tissue repair capabilities.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. Handle with care. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Fatigue 

• Headache 

• Mild dizziness

Not Medical Advice

BPC-157

Body Protection Compound-157 is a pentadecapeptide composed of 15 amino acids, originally isolated from human gastric juice. It demonstrates remarkable systemic healing properties throughout the body, with research showing accelerated recovery of muscles, tendons, ligaments, nerves, and even the gut lining. BPC-157 works through multiple pathways including angiogenesis promotion, nitric oxide modulation, and growth factor regulation.

Key Benefits

• Accelerates healing of wounds, tendons, ligaments, and bone 

• Reduces inflammation 

• Protects the gut and heals stomach ulcers 

• Neuroprotective properties

Research Dosing Data

Common research dosages range from 250mcg to 500mcg once or twice daily. It is often used subcutaneously near the site of injury or systemically. Start at the lower end (250mcg once daily) to assess tolerance, then titrate up to 500mcg twice daily over 1-2 weeks if well-tolerated. Typical research cycles run 4-8 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

TENDON/LIGAMENT REPAIR

250-500mcg twice daily, injected subcutaneously near the injury site. 6-8 week cycles. Start at 250mcg and titrate up after 1 week.

GUT HEALING / DIGESTIVE SUPPORT

250-500mcg once daily, subcutaneous (abdominal area). 4-8 week cycles. Oral capsule form (500mcg) may be preferred for direct GI exposure.

MUSCLE RECOVERY

250-500mcg daily, injected near the affected muscle group. 4-6 week cycles. Can pair with TB-500 for enhanced systemic repair.

NERVE DAMAGE / NEUROPROTECTION

250mcg twice daily, subcutaneous. 4-8 weeks. Often combined with systemic administration rather than localized.

JOINT SUPPORT

500mcg daily, subcutaneous near the affected joint. 6-8 week cycles. Consider pairing with TB-500 blend for comprehensive joint recovery.

SKIN HEALING / SCAR REDUCTION

250-500mcg daily, subcutaneous near the affected area. 4-8 weeks. BPC-157 promotes angiogenesis and tissue remodeling, supporting wound closure and reducing scar formation.

INFLAMMATION MANAGEMENT

250-500mcg daily, subcutaneous. 4-8 week cycles. BPC-157 modulates nitric oxide pathways and reduces systemic inflammation, supporting recovery from inflammatory conditions.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. Swirl gently, do not shake. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

Generally well-tolerated. Potential mild side effects include: 

• Nausea 

• Headache 

• Dizziness

Not Medical Advice

Bacteriostatic Water

Bacteriostatic Water for Injection (USP) is sterile, non-pyrogenic water containing 0.9% benzyl alcohol as an antimicrobial preservative. Unlike sterile water (single-use only), bacteriostatic water can be used for multiple withdrawals over 28 days because the benzyl alcohol prevents bacterial contamination. It is the preferred diluent for reconstituting lyophilized peptides, as it maintains sterility through repeated access while providing a neutral pH that preserves peptide stability.

Key Benefits

• Safe reconstitution medium 

• Prevents bacterial growth for up to 28 days after opening

Research Dosing Data

Used as a solvent according to specific peptide reconstitution requirements.

Mixing Instructions

Ready for use. Store in a cool, dry place.

Possible Side Effects

• Localized irritation at injection site (rare)

Not Medical Advice

Acetic Acid Solution

A dilute solution used primarily to reconstitute and stabilize specific peptides such as IGF-1 LR3, IGF-DES, Peg-MGF, and AOD-9604. It provides the necessary acidic environment to prevent peptide molecules from clumping (aggregating) or sticking to the glass vial, ensuring full recovery of the active compound during research.

Key Benefits

• Essential for maintaining stability of IGF-1 LR3, IGF-DES, and AOD-9604 

• Prevents peptide aggregation (clumping) 

• Maintains potency of sensitive long-chain peptides during long-term storage 

• Provides optimal pH environment for specific research compounds 

• Antibacterial properties due to acidic environment

Mixing Instructions

Use as directed by specific laboratory protocols. Avoid over-agitation after adding to peptide vial.

Possible Side Effects

• Stinging sensation at injection site (can be minimized by diluting with Bacteriostatic Water immediately before use) 

• Localized redness

Not Medical Advice

HHB Blend (Hair Health Blend)

HHB Blend (Hair Health Blend) is a research peptide formulation designed to support hair follicle health, scalp vitality, and overall hair growth research. Formulations may vary by manufacturer but commonly include a combination of Copper Peptides (GHK-Cu), growth factors, amino acids, vitamins, and other hair-supporting compounds studied for their roles in follicle regeneration, collagen production, tissue repair, and scalp health. Research suggests these ingredients may promote a healthier hair growth cycle, improve follicle function, and support thicker, stronger-looking hair.

Key Benefits

• Supports healthy hair follicle function

• Promotes scalp health and tissue repair

• May improve hair thickness and density

Research Dosing Data

HHB Blend is commonly studied as a topical or cosmetic microneedling formulation. Typical research protocols involve applying the solution 1-3 times per week during cosmetic procedures or once daily as a topical scalp treatment, depending on the formulation. Research periods commonly range from 8-24 weeks, as hair growth studies require extended evaluation. (Not Medical Advice)

Possible Uses & Dosing by Goal

• HAIR GROWTH SUPPORT

• Apply according to the research protocol 1-3 times weekly (microneedling) or once daily (topical). Research focuses on supporting healthy hair follicle activity and improving hair density.

• SCALP HEALTH

• Use as directed by the research formulation. Studies investigate improvements in scalp circulation, collagen production, and overall scalp condition to support healthy follicles.

• THINNING HAIR

• Regular application for 8-24 weeks. Research evaluates improvements in hair fullness, thickness, and reduced shedding over time.

• POST-HAIR RESTORATION SUPPORT

• Often incorporated into cosmetic research following scalp microneedling or hair restoration procedures to support tissue repair, collagen remodeling, and follicle recovery.

Mixing Instructions

HHB Blend may be supplied as a lyophilized peptide blend or pre-formulated cosmetic solution, depending on the manufacturer. If supplied as a lyophilized powder, reconstitute with Bacteriostatic Water or an appropriate cosmetic solution according to your research protocol. Store refrigerated after reconstitution and protect from excessive heat and direct light. Avoid repeated freeze-thaw cycles to maintain stability. If supplied as a ready-to-use formulation, no reconstitution is required.

Possible Side Effects

• Temporary scalp redness

• Mild irritation

• Tingling sensation

• Temporary dryness

• Mild sensitivity at the application site

Not Medical Advice

5-Amino-1MQ

5-Amino-1MQ (5-Amino-1-Methylquinolinium) is a small-molecule research compound that has gained attention for its potential role in regulating metabolism and body composition. It functions as an inhibitor of Nicotinamide N-Methyltransferase (NNMT), an enzyme involved in energy metabolism and fat storage. Research suggests that inhibiting NNMT may increase cellular energy expenditure, improve metabolic efficiency, reduce fat accumulation, and help preserve lean muscle mass. Because of its unique mechanism, 5-Amino-1MQ has become an area of interest in obesity, metabolic health, and healthy aging research.

Key Benefits

• Supports healthy fat metabolism

• May increase cellular energy expenditure

• Helps preserve lean muscle mass during fat loss

Research Dosing Data

Common research protocols involve 50mg to 100mg once daily, with some studies evaluating up to 150mg daily depending on research objectives. Researchers often begin with 50mg daily for the first 1-2 weeks before increasing if appropriate. Research cycles commonly range from 6-12 weeks. 

Possible Uses & Dosing by Goal

• BODY FAT REDUCTION

• 50-100mg once daily. 6-12 week cycles. Research suggests NNMT inhibition may promote increased energy expenditure and reduce fat accumulation while supporting healthy body composition.

• METABOLIC SUPPORT

• 50mg once daily. Research investigates improvements in metabolic efficiency, nutrient utilization, and healthy energy balance.

• LEAN MUSCLE PRESERVATION

• 50-100mg daily. Often studied during calorie restriction to help preserve lean muscle mass while encouraging fat loss.

• HEALTHY AGING & CELLULAR ENERGY

• 50-100mg once daily. Research focuses on supporting cellular metabolism, mitochondrial function, and healthy aging through modulation of NNMT activity.

Mixing Instructions

5-Amino-1MQ may be supplied as a lyophilized powder or oral research formulation, depending on the manufacturer. If supplied as a lyophilized powder intended for injectable laboratory research, reconstitute with Bacteriostatic Water according to your research protocol. A common research reconstitution uses 2ml of Bacteriostatic Water per 100mg vial, though concentrations may vary based on study requirements. Store refrigerated after reconstitution and protect from excessive heat and direct light. If supplied in capsules or tablets, no reconstitution is required. Use our calculator to determine the appropriate research concentration when applicable.

Possible Side Effects

• Mild headache

• Temporary nausea

• Fatigue

• Decreased appetite

• Mild injection site irritation (injectable research formulations)

Not Medical Advice

Lipo-C / Fat Blaster

Lipo-C / Fat Blaster is a research blend of lipotropic compounds commonly formulated with L-Carnitine, Methionine, Inositol, Choline, Vitamin B12, and other metabolic support ingredients depending on the manufacturer. These compounds are studied for their roles in fatty acid transport, energy production, liver support, and healthy lipid metabolism. Research suggests lipotropic blends may enhance the body's ability to utilize stored fat for energy while supporting metabolic function and overall wellness when combined with proper nutrition and exercise.

Key Benefits

• Supports healthy fat metabolism

• Promotes energy production

• Supports liver function and nutrient metabolism

Research Dosing Data

Common research protocols involve 0.5ml to 1ml administered 1-3 times per week via subcutaneous or intramuscular injection, depending on the formulation. Researchers often begin with 0.5ml once weekly to assess tolerance before increasing frequency as needed. Research cycles typically range from 4-12 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• FAT LOSS SUPPORT

• 0.5-1ml, 2-3 times weekly, subcutaneous or intramuscular. Research focuses on supporting fatty acid metabolism and encouraging the body to utilize fat as an energy source alongside a calorie-controlled diet and exercise.

• ENERGY & METABOLIC SUPPORT

• 1ml once or twice weekly. Lipotropic ingredients and Vitamin B12 are commonly researched for supporting cellular energy production and healthy metabolic function.

• BODY COMPOSITION

• 1ml two to three times weekly, combined with regular physical activity and proper nutrition. Studies investigate improvements in fat utilization while helping maintain lean body mass.

• LIVER HEALTH & LIPID METABOLISM

• 0.5-1ml once or twice weekly. Research suggests lipotropic nutrients may support normal liver function, healthy lipid processing, and efficient nutrient metabolism.

Mixing Instructions

Lipo-C / Fat Blaster is typically supplied as a sterile, pre-mixed injectable solution and does not require reconstitution. Store refrigerated according to the manufacturer's recommendations and protect from excessive heat and direct light. Do not freeze. If your formulation differs, always follow the preparation and storage instructions provided with the specific product.

Possible Side Effects

• Mild injection site redness

• Temporary soreness

• Mild nausea

• Headache

• Flushing (may occur due to Vitamin B12)

• Temporary dizziness (uncommon)

Not Medical Advice

Lipo-C

Lipo-C is a research blend commonly containing L-Carnitine, Methionine, Inositol, Choline, Vitamin B12 (Methylcobalamin or Cyanocobalamin), and other lipotropic compounds, depending on the specific formulation. These ingredients have been studied for their roles in fatty acid transport, energy metabolism, liver function, and nutrient utilization. Lipo-C is widely researched as a metabolic support compound that may promote healthy fat metabolism, assist with energy production, and support overall wellness when combined with proper nutrition and physical activity.

Key Benefits

• Supports healthy fat metabolism

• Promotes energy production

• Supports liver health and nutrient metabolism

Research Dosing Data

Common research protocols involve 0.5ml to 1ml administered 1-3 times per week via subcutaneous or intramuscular injection, depending on the formulation being studied. Researchers often begin with 0.5ml once weekly before increasing frequency based on study objectives. Research cycles typically last 4-12 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• FAT METABOLISM

• 0.5-1ml, 1-3 times weekly, subcutaneous or intramuscular. 4-12 week cycles. Research investigates Lipo-C for supporting fatty acid transport and healthy lipid metabolism.

• ENERGY SUPPORT

• 1ml once or twice weekly, subcutaneous or intramuscular. The combination of lipotropic nutrients and Vitamin B12 has been studied for supporting cellular energy production and reducing fatigue.

• BODY COMPOSITION

• 1ml two to three times weekly, alongside proper nutrition and exercise. Research focuses on supporting healthy body composition by improving fat utilization and metabolic efficiency.

• LIVER & METABOLIC HEALTH

• 0.5-1ml once or twice weekly. Studies suggest lipotropic compounds may support normal liver function, nutrient metabolism, and overall metabolic health.

Mixing Instructions

Lipo-C is commonly supplied as a pre-mixed sterile injectable solution and does not require reconstitution. Store refrigerated according to the manufacturer's recommendations and protect from excessive heat and direct light. If your research formulation differs, always follow the preparation instructions provided with the specific product.

Possible Side Effects

• Mild injection site redness

• Temporary soreness

• Nausea

• Mild headache

• Flushing (occasionally due to Vitamin B12 or other ingredients)

Not Medical Advice

KPV

KPV (Lysine–Proline–Valine) is a naturally occurring three-amino acid peptide derived from the anti-inflammatory region of α-Melanocyte-Stimulating Hormone (α-MSH). Unlike the full α-MSH molecule, KPV retains potent anti-inflammatory activity without affecting skin pigmentation. Research suggests KPV may help regulate inflammatory pathways, support gut barrier integrity, promote tissue repair, and improve skin health. It has been investigated in studies involving inflammatory bowel conditions, skin irritation, wound healing, and immune modulation.

Key Benefits

• Supports healthy inflammatory response

• Promotes gut and intestinal barrier health

• Supports skin repair and recovery

Research Dosing Data

Common research protocols involve 250mcg to 500mcg once or twice daily via subcutaneous injection. Some research evaluates doses up to 1mg daily depending on study objectives. KPV has also been investigated in topical formulations for skin research. Research cycles commonly range from 4-12 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• GUT HEALTH & INTESTINAL SUPPORT

• 250-500mcg once or twice daily, subcutaneous. 4-12 week cycles. Research suggests KPV may support intestinal barrier function and promote a balanced inflammatory response within the gastrointestinal tract.

• SKIN HEALTH & RECOVERY

• Topical formulations or 250-500mcg daily, depending on research protocol. Studies have investigated KPV for supporting skin healing, reducing redness, and improving recovery from irritation.

• GENERAL INFLAMMATORY SUPPORT

• 250-500mcg once or twice daily, subcutaneous. 4-8 week cycles. Research indicates KPV may help regulate inflammatory cytokines while supporting healthy immune function.

• TISSUE REPAIR & RECOVERY

• 500mcg-1mg daily, subcutaneous. 4-8 weeks. Investigated for supporting tissue regeneration and recovery following inflammatory stress or injury.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A common reconstitution uses 2ml of Bacteriostatic Water per 10mg vial, resulting in a concentration of 5mg/ml. You may adjust the amount of bacteriostatic water depending on your preferred concentration. More water provides easier measurement of smaller doses, while less water creates a higher concentration requiring smaller injection volumes. Store refrigerated after reconstitution and protect from excessive heat and direct light. Use our peptide calculator to determine the exact insulin syringe units for your desired research dose.

Possible Side Effects

• Mild injection site redness

• Temporary irritation

• Mild headache

• Temporary nausea (rare)

• Fatigue (rare)

Not Medical Advice

Matrixyl

Matrixyl® (Palmitoyl Pentapeptide-4, also known as Palmitoyl Pentapeptide-3) is a cosmetic peptide widely studied for its ability to support collagen production and improve the appearance of aging skin. It functions as a messenger peptide, signaling skin cells to produce key extracellular matrix components such as collagen, elastin, and glycosaminoglycans. Research has shown Matrixyl® may help reduce the appearance of fine lines and wrinkles while improving skin firmness, elasticity, and hydration. It is commonly incorporated into anti-aging serums, creams, and cosmetic microneedling formulations.

Key Benefits

• Supports collagen production

• Helps reduce the appearance of fine lines and wrinkles

• Improves skin firmness and elasticity

Research Dosing Data

Matrixyl is intended for topical cosmetic research and is commonly formulated at concentrations between 2% and 10% in serums, creams, and cosmetic solutions. It is typically applied once or twice daily to clean skin. In cosmetic microneedling research, lower concentrations are often used to enhance skin penetration. Visible improvements are generally evaluated after 4-12 weeks of consistent application. (Not Medical Advice)

Possible Uses & Dosing by Goal

• ANTI-AGING SKIN CARE

• 2-10% topical formulation, applied once or twice daily. Research suggests Matrixyl® supports collagen synthesis and improves overall skin texture and firmness.

• FINE LINES & WRINKLES

• Apply a topical formulation daily to areas of concern. Studies have demonstrated improvements in the appearance of facial wrinkles through stimulation of collagen production.

• SKIN FIRMNESS & ELASTICITY

• Use 2-10% topical formulation once or twice daily. Matrixyl® has been researched for enhancing skin elasticity and restoring a firmer, smoother appearance.

• POST-MICRONEEDLING SUPPORT

• Often incorporated into cosmetic microneedling serums at lower concentrations. Research focuses on supporting collagen remodeling and improving skin texture following cosmetic procedures.

Mixing Instructions

Matrixyl is commonly supplied as a cosmetic ingredient or lyophilized powder for research applications. Reconstitute with sterile water or an appropriate cosmetic serum base according to your research protocol. Store refrigerated after reconstitution and protect from excessive heat and direct light. Avoid repeated freeze-thaw cycles to maintain peptide stability. Final concentrations should be adjusted based on the intended cosmetic formulation. Use our calculator when preparing custom research concentrations.

Possible Side Effects

• Mild skin irritation

• Temporary redness

• Dryness

• Mild tingling

• Temporary skin sensitivity

Not Medical Advice

SNAP-8

SNAP-8 (Acetyl Glutamyl Heptapeptide-3) is an eight-amino acid peptide developed as an advanced version of Argireline®. It works by inhibiting the SNARE complex involved in neurotransmitter release, helping reduce repetitive facial muscle contractions that contribute to the formation of expression lines and wrinkles. In cosmetic research, SNAP-8 is commonly studied as a non-invasive alternative for reducing the appearance of dynamic facial wrinkles while maintaining natural facial movement. It is widely used in anti-aging serums, creams, and microneedling research formulations.

Key Benefits

• Helps reduce the appearance of expression lines

• Supports smoother, younger-looking skin

• May soften forehead lines, crow's feet, and smile lines

Research Dosing Data

SNAP-8 is intended for topical cosmetic research and is commonly formulated at concentrations between 3% and 10% in serums, creams, or microneedling solutions. It is generally applied once or twice daily to areas of concern. When used during cosmetic microneedling research, lower concentrations are commonly utilized. Consistent application over 4-12 weeks is typically evaluated for visible improvements. (Not Medical Advice)

Possible Uses & Dosing by Goal

• FINE LINES & WRINKLES

• 3-10% topical formulation, applied once or twice daily. Research suggests SNAP-8 may help reduce the appearance of dynamic wrinkles by decreasing repetitive facial muscle contractions.

• FOREHEAD LINES

• Apply a topical formulation directly to the forehead once or twice daily. Research focuses on reducing the appearance of horizontal forehead lines while maintaining natural facial expressions.

• CROW'S FEET

• Apply around the outer corners of the eyes using a cosmetic formulation. Regular use has been studied for improving the appearance of fine lines caused by repeated facial movement.

• ANTI-AGING SKIN CARE

• Use as part of a daily skincare routine in a 3-10% cosmetic formulation. Often combined with peptides such as Matrixyl®, Hyaluronic Acid, or Copper Peptides to support smoother, firmer-looking skin.

Mixing Instructions

SNAP-8 is commonly supplied as a lyophilized powder for cosmetic research. Reconstitute with sterile water or an appropriate cosmetic formulation base according to your research protocol. Once reconstituted, store refrigerated and protect from direct light. Avoid repeated freeze-thaw cycles to preserve peptide stability. The final concentration should be based on the intended cosmetic formulation. Use our calculator if preparing custom research concentrations.

Possible Side Effects

• Mild skin irritation

• Temporary redness

• Dryness at application site

• Temporary sensitivity

• Mild tingling after application

Not Medical Advice

Tesamorelin

Tesamorelin is a synthetic analog of Growth Hormone-Releasing Hormone (GHRH) consisting of 44 amino acids. It stimulates the pituitary gland to naturally increase growth hormone (GH) production, leading to higher levels of insulin-like growth factor-1 (IGF-1). Research has shown Tesamorelin may promote fat metabolism, particularly reducing visceral (abdominal) fat, while supporting lean muscle mass, recovery, and overall metabolic health. Because it works by stimulating the body's own GH production, it follows the body's natural feedback mechanisms.

Key Benefits

• Supports reduction of visceral (abdominal) fat

• Increases natural Growth Hormone production

• Helps preserve lean muscle mass

Research Dosing Data

Common research protocols involve 1mg to 2mg once daily via subcutaneous injection. Many researchers begin with 1mg daily for the first 1-2 weeks before increasing to 2mg daily if appropriate. Tesamorelin is commonly administered in the evening or before bedtime to complement the body's natural growth hormone pulse. Research cycles typically last 8-16 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• VISCERAL FAT REDUCTION

• 2mg once daily, subcutaneous. 8-16 week cycles. Research demonstrates Tesamorelin may significantly reduce visceral adipose tissue while helping maintain lean body mass.

• BODY COMPOSITION

• 1-2mg daily, subcutaneous. 8-12 weeks. May support improved fat metabolism, muscle preservation, and overall body composition when combined with proper nutrition and exercise.

• RECOVERY & GROWTH HORMONE SUPPORT

• 1-2mg once daily, subcutaneous. 8-16 week cycles. Stimulates endogenous growth hormone release, supporting tissue repair, recovery, and healthy IGF-1 levels.

• HEALTHY AGING / METABOLIC SUPPORT

• 1-2mg daily, subcutaneous. 8-16 week cycles. Research suggests improved metabolic function, lipid metabolism, and healthy body composition through increased natural growth hormone secretion.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A common reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, resulting in a concentration of 10mg/ml. The amount of bacteriostatic water may be adjusted depending on the desired concentration. More water creates a lower concentration for easier measurement, while less water produces a higher concentration requiring smaller injection volumes. Store refrigerated after reconstitution and protect from excessive heat and light. Use our peptide calculator to determine the exact insulin syringe units for your desired research dose.

Possible Side Effects

• Injection site redness

• Mild swelling or irritation

• Headache

• Temporary joint discomfort

• Water retention

Not Medical Advice

Tirzepatide

Tirzepatide is a first-in-class dual glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide-1 (GLP-1) receptor agonist. This 39-amino acid synthetic peptide activates both incretin pathways simultaneously, providing more robust glycemic control and weight loss than single-receptor agonists. Clinical trials demonstrate unprecedented average weight loss of 15-22% of body weight, along with improvements in cardiovascular risk factors, blood pressure, and lipid profiles.

Key Benefits

• Significant weight loss 

• Improved insulin sensitivity 

• Reduced appetite 

• Cardiovascular benefits

Research Dosing Data

Starts at 2.5mg once weekly for the first 4 weeks. If tolerated, titrate to 5mg weekly for weeks 5-8, then 7.5mg, 10mg, 12.5mg, and up to 15mg in 4-week intervals. Slow titration is critical to minimize GI side effects (nausea, diarrhea). Never skip dose levels. If side effects persist at any level, remain at that dose for an additional 4 weeks before increasing. Inject on the same day each week. (Not Medical Advice)

Possible Uses & Dosing by Goal

• WEIGHT LOSS

• 2.5mg weekly, titrating up every 4 weeks to 10-15mg. 6-12+ month protocols. Clinical trials show 15-22% average body weight reduction. Slow titration is essential to manage GI side effects.

• INSULIN SENSITIVITY / BLOOD SUGAR MANAGEMENT

• 5-10mg weekly. Ongoing use. Dual GIP/GLP-1 activation enhances glucose-dependent insulin secretion and reduces insulin resistance.

• CARDIOVASCULAR HEALTH

• 5-15mg weekly. Long-term use. Research demonstrates improvements in blood pressure, lipid profiles, and cardiovascular risk markers alongside weight loss.

• APPETITE MANAGEMENT

• 5-10mg weekly. Ongoing use. Dual GIP/GLP-1 receptor activation significantly reduces appetite and food cravings through hypothalamic signaling and delayed gastric emptying, supporting sustainable dietary adherence.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. Must be refrigerated. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nausea (common during titration) 

• Diarrhea or constipation 

• Acid reflux

Not Medical Advice

Thymosin A-1

Thymosin Alpha-1 (Tα1) is a 28-amino acid peptide originally isolated from thymus gland tissue, where it regulates T-cell maturation and immune function. It enhances both innate and adaptive immunity by stimulating T-cell differentiation, natural killer cell activity, and dendritic cell function. FDA-approved as an orphan drug for hepatitis and studied extensively for immune deficiencies, Tα1 is particularly researched for its ability to restore immune competence in aging (immunosenescence) and support immune responses during infection or illness.

Key Benefits

• Potent immune system enhancer 

• Anti-viral and anti-tumor properties 

• Improves vaccine efficacy

Research Dosing Data

Common dosage is 1.5mg to 3mg administered twice weekly via subcutaneous injection. Start at 1.5mg twice weekly for the first 2 weeks, then titrate to 3mg twice weekly if well-tolerated. Some protocols use daily low-dose administration (450mcg-900mcg daily). Research cycles often run 2-3 months, particularly during cold/flu season or immune recovery periods. Space doses evenly (e.g., Monday and Thursday). (Not Medical Advice)

Possible Uses & Dosing by Goal

• IMMUNE SUPPORT / IMMUNOMODULATION

• 1.5-3mg twice weekly, subcutaneous. 2-3 month cycles. Thymosin Alpha-1 enhances both innate and adaptive immunity by stimulating T-cell differentiation, NK cell activity, and dendritic cell function.

• ANTI-VIRAL SUPPORT

• 1.5-3mg twice weekly, subcutaneous. During illness or exposure periods. FDA-approved as an orphan drug for hepatitis; studied extensively for restoring immune competence during infection.

• VACCINE EFFICACY ENHANCEMENT

• 1.5mg twice weekly, subcutaneous, beginning 2 weeks before vaccination. Research shows improved immune response to vaccines, particularly in aging populations with immunosenescence.

• GUT HEALTH / GI IMMUNE SUPPORT

• 1.5-3mg twice weekly, subcutaneous. 2-3 month cycles. Thymosin Alpha-1 supports gut-associated lymphoid tissue (GALT) immune function, enhancing GI immune surveillance and supporting intestinal immune homeostasis.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Redness at injection site 

• Rare fever or chills

Not Medical Advice

TB-500

TB-500 is a synthetic version of Thymosin Beta-4, a 43-amino acid protein naturally produced in higher concentrations at sites of tissue damage. It plays a critical role in cell migration, blood vessel formation, and cellular differentiation. Research indicates TB-500 upregulates actin, a cell-building protein essential for tissue repair, and promotes systemic healing effects that extend throughout the body rather than being localized to the injection site.

Key Benefits

• Promotes rapid wound healing 

• Improves flexibility 

• Reduces inflammation 

• Promotes hair growth

Research Dosing Data

Loading phase: 2-2.5mg twice weekly for 4-6 weeks. Maintenance: 2-2.5mg once every 2 weeks. Begin with 2mg twice weekly and assess response before increasing to 2.5mg. The loading phase saturates tissue levels; once improvement plateaus, transition to maintenance dosing. Typical loading cycles are 4-6 weeks followed by indefinite maintenance. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SYSTEMIC INJURY RECOVERY

• Loading: 2.5mg twice weekly for 4-6 weeks. Maintenance: 2.5mg every 2 weeks. TB-500 works systemically regardless of injection site, making it ideal for widespread tissue repair.

• CHRONIC JOINT / TENDON ISSUES

• 2mg twice weekly for 6 weeks, then 2mg every 2 weeks. Best combined with BPC-157 for localized + systemic approach.

• FLEXIBILITY / MOBILITY

• 2mg twice weekly for 4 weeks. TB-500 increases flexibility by promoting cellular migration and reducing adhesions in connective tissue.

• HAIR REGROWTH SUPPORT

• 2-2.5mg twice weekly for 6-8 weeks. Research shows TB-500 promotes hair follicle stem cell migration. Often combined with GHK-Cu for comprehensive hair support.

• POST-SURGICAL RECOVERY

• Loading: 2.5mg twice weekly starting post-surgery for 4-6 weeks. Then maintenance at 2.5mg every 2 weeks.

• CARDIAC SUPPORT

• 2-2.5mg twice weekly for 6-8 weeks, then maintenance. Research shows TB-500 supports cardiac tissue repair and regeneration through actin upregulation and promotion of new blood vessel formation in damaged cardiac tissue.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. Requires gentle handling. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Temporary redness at injection site 

• Fatigue 

• Head rush immediately after injection

Not Medical Advice

SS-31

SS-31 (Elamipretide) is a cell-permeable tetrapeptide that selectively targets the inner mitochondrial membrane, where it binds to cardiolipin — a phospholipid critical for maintaining mitochondrial cristae architecture and the efficiency of the electron transport chain. By protecting cardiolipin from oxidation, SS-31 preserves ATP synthase activity, reduces reactive oxygen species (ROS) production, and restores mitochondrial membrane potential. Research shows promise in conditions driven by mitochondrial dysfunction including heart failure, neurodegenerative disease, skeletal muscle aging, and ischemia-reperfusion injury. SS-31 is one of the most studied mitochondria-targeted antioxidant peptides.

Key Benefits

• Restores mitochondrial function and ATP production 

• Reduces reactive oxygen species (ROS) 

• Cardiac and skeletal muscle protection 

• Neuroprotective properties 

• Anti-aging via mitochondrial health

Research Dosing Data

Common research dosages range from 1mg to 5mg per injection, administered subcutaneously or intravenously. Start at 1-2mg subcutaneous daily to assess tolerance. Higher doses (3-5mg) are used in acute research applications. Some protocols use 3x weekly dosing for ongoing mitochondrial support. Research cycles vary from 4-12 weeks. IV administration is used in clinical research settings. (Not Medical Advice)

Possible Uses & Dosing by Goal

• MITOCHONDRIAL SUPPORT / ENERGY

• 1-3mg subcutaneous, daily or 3 times weekly. 4-8 week cycles. SS-31 binds cardiolipin to preserve electron transport chain efficiency and restore ATP production, directly addressing cellular energy deficits.

• CARDIAC PROTECTION

• 2-5mg subcutaneous or IV in research protocols. 4-8 weeks. Research demonstrates SS-31 reduces ischemia-reperfusion injury, preserves cardiac function, and protects cardiomyocytes from oxidative damage.

• ANTI-AGING / LONGEVITY

• 1-3mg subcutaneous, 3 times weekly. Ongoing protocols. Mitochondrial dysfunction is a hallmark of aging — SS-31 restores youthful mitochondrial membrane architecture and reduces age-associated ROS accumulation.

• NEUROPROTECTION

• 1-3mg subcutaneous, daily or 3 times weekly. 4-8 weeks. Mitochondrial ROS reduction supports neuronal health. Research shows protective effects in models of neurodegeneration and cognitive decline.

• EXERCISE RECOVERY / MUSCLE HEALTH

• 1-3mg subcutaneous, post-exercise or daily. 4-8 week cycles. SS-31 improves mitochondrial function in skeletal muscle, supporting energy production during exercise and accelerating recovery.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. Swirl gently to dissolve — do not shake. Store reconstituted vial refrigerated (2–8°C) and protect from light. Use within 30 days of reconstitution. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Injection site irritation or redness 

• Generally well-tolerated in research settings 

• Rare transient fatigue

Not Medical Advice

Somatropin

Somatropin is recombinant human growth hormone (rhGH), a 191-amino acid single-chain polypeptide that is biologically identical to endogenous pituitary-derived growth hormone. Unlike secretagogues that stimulate natural GH production, Somatropin directly supplies exogenous GH, bypassing the pituitary entirely. It exerts effects through both direct receptor activation and indirect IGF-1 mediation, influencing virtually every tissue in the body including muscle, bone, fat, and organs.

Key Benefits

• Directly increases HGH levels 

• Massive recovery improvement 

• Lean muscle preservation 

• Improved metabolism

Research Dosing Data

Dosage varies significantly based on research goals. Often measured in IU (International Units). 1mg ≈ 3 IU. Anti-aging protocols typically use 1-2 IU daily; recovery-focused protocols may use 2-4 IU daily. Start at the lowest effective dose (1 IU/day) and titrate slowly over weeks. Administer in the morning or split into AM/PM doses. Monitor for water retention and joint pain as signs the dose may be too high. (Not Medical Advice)

Possible Uses & Dosing by Goal

• ANTI-AGING / LONGEVITY

• 1-2 IU daily, morning administration. Long-term use (6-12 months+). Low-dose protocols support skin elasticity, sleep quality, and overall vitality with minimal side effects.

• MUSCLE GROWTH / BODY COMPOSITION

• 2-4 IU daily, split AM/PM. 3-6 month cycles. Higher doses drive lean mass gains and fat reduction. Monitor for water retention and joint pain.

• FAT LOSS

• 2-3 IU daily, morning fasted. 3-6 months. GH directly promotes lipolysis. Best combined with fasted cardio and caloric management.

• INJURY RECOVERY / REHABILITATION

• 2-4 IU daily, split dosing. 8-16 weeks. Accelerates connective tissue repair, bone healing, and post-surgical recovery. Can be combined with healing peptides (BPC-157, TB-500).

• SKIN / HAIR / NAILS

• 1-2 IU daily, morning administration. 6-12 month cycles. GH directly promotes collagen production, keratin synthesis, and cellular turnover for improved skin elasticity, hair thickness, and nail strength.

• BONE DENSITY

• 2-4 IU daily, morning or split dosing. 6-12 month cycles. GH stimulates osteoblast activity and calcium retention, supporting bone mineral density and skeletal health.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.33ml of Bacteriostatic Water per 3.33mg (10 IU) vial, yielding a concentration of approximately 10mg/ml. Very sensitive to temperature and agitation. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nerve/muscle/joint pain 

• Carpal tunnel syndrome 

• Elevated blood sugar

Not Medical Advice

SLU-PP-332

SLU-PP-332 is a potent agonist of estrogen-related receptors (ERRs), a family of orphan nuclear receptors that regulate metabolic gene expression in muscle and other tissues. It activates the same transcriptional programs triggered by exercise, including increased mitochondrial biogenesis, enhanced oxidative capacity, and improved muscle endurance. Research in mice showed significantly enhanced running endurance without actual training. Formulated as sublingual dissolvable tablets for convenient administration without injection.

Key Benefits

• Increases fat burning 

• Enhances muscular endurance 

• Mimics effects of aerobic training

Research Dosing Data

Common research dosage is 500mcg daily via sublingual administration. Place the tablet under the tongue and allow it to dissolve completely without swallowing. Start with one tablet daily for the first week to assess tolerance. Take on an empty stomach for best absorption. Research is ongoing regarding optimal cycle length and long-term protocols. (Not Medical Advice)

Possible Uses & Dosing by Goal

• ENDURANCE ENHANCEMENT

• 500mcg daily, sublingual. Ongoing use. SLU-PP-332 activates estrogen-related receptors (ERRs) that regulate metabolic gene expression in muscle, significantly enhancing running endurance in research models without actual training.

• FAT BURNING

• 500mcg daily, sublingual. 8-12 week cycles. Activates the same transcriptional programs triggered by exercise, including increased mitochondrial biogenesis and enhanced oxidative capacity.

• EXERCISE MIMETIC

• 500mcg daily, sublingual. Ongoing use. Mimics the effects of aerobic training at the molecular level by increasing mitochondrial biogenesis and improving muscle oxidative capacity.

Mixing Instructions

Dissolvable sublingual tablet - no reconstitution required.

Possible Side Effects

• Research is ongoing; potential for metabolic changes

Not Medical Advice

Sermorelin

Sermorelin is a bioidentical synthetic peptide containing the first 29 amino acids of the 44-amino acid sequence of human GHRH. It represents the shortest fragment of GHRH that retains full biological activity. By stimulating the pituitary to produce and release its own growth hormone, Sermorelin maintains the body's natural feedback mechanisms and preserves physiological GH pulsatility. It's often considered a gentler, more natural approach to GH optimization compared to exogenous HGH.

Key Benefits

• Stimulates pituitary gland function 

• Improved energy levels 

• Better skin health 

• Increased bone density

Research Dosing Data

Common dosage is 200mcg to 500mcg daily, usually administered at bedtime on an empty stomach. Begin at 200mcg nightly for the first week, then titrate up by 100mcg increments every 3-5 days until reaching the desired response (up to 500mcg). Bedtime dosing aligns with natural GH pulsatility during sleep. Often used as part of long-term protocols (3-6 months or longer). (Not Medical Advice)

Possible Uses & Dosing by Goal

• ANTI-AGING / GENERAL WELLNESS

• 200-300mcg nightly before bed. 3-6 month cycles or longer. Supports natural GH pulsatility for skin, energy, and overall vitality without suppressing pituitary function.

• SLEEP OPTIMIZATION

• 200-500mcg 30-60 minutes before bed, fasted. Ongoing use. Sermorelin enhances deep sleep phases by amplifying natural nocturnal GH pulses.

• MUSCLE RECOVERY

• 300-500mcg daily, bedtime dosing. 3-6 months. Supports muscle repair and growth through enhanced endogenous GH release.

• FAT LOSS

• 300-500mcg nightly, fasted. 3-6 month cycles. Enhanced GH secretion during sleep promotes overnight fat oxidation. Pair with morning fasted cardio for synergistic effects.

• SKIN / HAIR / NAILS

• 200-300mcg nightly before bed. 3-6 month cycles. Enhanced endogenous GH release supports collagen production, keratin synthesis, and cellular renewal for improved skin, hair, and nail quality.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.2ml of Bacteriostatic Water per 2mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Injection site reaction 

• Headache • Dizziness

Not Medical Advice

Semax

Semax is a synthetic heptapeptide derived from the N-terminal fragment of adrenocorticotropic hormone (ACTH 4-10) with an added Pro-Gly-Pro sequence for stability. Developed in Russia, it demonstrates potent nootropic and neuroprotective properties through BDNF upregulation, enhanced NGF expression, and modulation of dopamine and serotonin systems. Clinical applications include cognitive enhancement, stroke recovery, and treatment of cognitive disorders. It improves attention, memory formation, and mental clarity without stimulant-like side effects.

Key Benefits

• Improved mental clarity and focus 

• Neuroprotective properties 

• Enhanced learning ability

Research Dosing Data

Common dosage is 100mcg to 500mcg daily, administered intranasally or subcutaneously. Start at 100mcg daily and titrate up by 100mcg increments every few days based on cognitive response. Intranasal administration is the most common and convenient route, typically split into 2-3 doses throughout the day. Effects on focus and mental clarity are usually noticeable within the first few days. Research cycles commonly run 2-4 weeks on, 1-2 weeks off. (Not Medical Advice)

Possible Uses & Dosing by Goal

• COGNITIVE ENHANCEMENT / FOCUS

• 200-500mcg daily, intranasal (split 2-3 doses). 2-4 weeks on, 1-2 weeks off. Semax upregulates BDNF and NGF expression, enhancing attention, memory formation, and mental clarity without stimulant-like side effects.

• NEUROPROTECTION

• 300-500mcg daily, intranasal or subcutaneous. 2-4 week cycles. Research shows potent neuroprotective properties through BDNF upregulation and modulation of dopamine and serotonin systems.

• FOCUS / MENTAL CLARITY

• 100-300mcg daily, intranasal. Ongoing use with periodic breaks. Effects on focus and mental clarity are usually noticeable within the first few days of use.

• MOOD / MOTIVATION

• 200-500mcg daily, intranasal (split 2-3 doses). 2-4 week cycles. Semax modulates dopamine and serotonin systems, supporting mood elevation, motivation, and drive without stimulant-like side effects or dependence.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Mild irritability (rare) 

• Headache

Not Medical Advice

Semaglutide

Semaglutide is a long-acting GLP-1 receptor agonist with 94% structural homology to native GLP-1, modified for extended duration via albumin binding and DPP-4 resistance. It enhances glucose-dependent insulin secretion, suppresses appetite through hypothalamic signaling, and delays gastric emptying. FDA-approved for both Type 2 diabetes (Ozempic) and chronic weight management (Wegovy), clinical trials demonstrate average weight loss of 15-17% with cardiovascular benefits including reduced major adverse cardiovascular events (MACE).

Key Benefits

• Effective weight management 

• Improved blood sugar control 

• Cardiovascular risk reduction

Research Dosing Data

Starting dose is 0.25mg once weekly for the first 4 weeks. Titrate to 0.5mg weekly for weeks 5-8, then 1mg for weeks 9-12, and up to 2.4mg over several months. Slow titration is essential to manage nausea and GI side effects. If side effects are significant at any dose, stay at that level for an additional 4 weeks before increasing. Never increase by more than one dose level at a time. Inject on the same day each week. (Not Medical Advice)

Possible Uses & Dosing by Goal

• WEIGHT MANAGEMENT

• 0.25mg weekly, titrating up every 4 weeks through 0.5mg, 1mg, 1.7mg, to 2.4mg. 6-12+ month protocols. Clinical trials demonstrate 15-17% average body weight reduction. Never skip dose levels.

• BLOOD SUGAR MANAGEMENT

• 0.5-1mg weekly. Ongoing use. GLP-1 receptor activation enhances glucose-dependent insulin secretion, reduces glucagon, and improves HbA1c levels.

• CARDIOVASCULAR HEALTH

• 1-2.4mg weekly. Long-term use. Research shows reduced major adverse cardiovascular events (MACE), improved blood pressure, and better lipid profiles.

• APPETITE MANAGEMENT

• 0.5-2.4mg weekly. Ongoing use. GLP-1 receptor activation significantly reduces appetite and food cravings through hypothalamic signaling and delayed gastric emptying, supporting sustainable dietary changes.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. Must be refrigerated. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nausea 

• Vomiting 

• Diarrhea

Not Medical Advice

Selank

Selank is a synthetic heptapeptide developed in Russia by combining the tuftsin immunomodulatory sequence (Thr-Lys-Pro-Arg) with the stabilizing sequence Pro-Gly-Pro. It acts as an anxiolytic (anti-anxiety) and nootropic agent through modulation of GABA, serotonin, dopamine, and norepinephrine systems, without the sedation or dependence associated with benzodiazepines. Research shows improved memory consolidation, reduced anxiety, enhanced learning, and immunomodulatory benefits. It's approved in Russia for anxiety and neurasthenic disorders.

Key Benefits

• Reduces anxiety and stress 

• Improves memory and focus 

• Enhances immune function

Research Dosing Data

Common research dose is 250mcg to 500mcg daily, often administered intranasally or subcutaneously. Start at 250mcg daily for the first week, then titrate to 500mcg if additional anxiolytic or cognitive effects are desired. Intranasal administration is the most common route, typically split into 2-3 doses throughout the day. Effects are often noticed within 30-60 minutes. Research cycles commonly run 2-4 weeks, though some protocols extend longer. (Not Medical Advice)

Possible Uses & Dosing by Goal

• ANXIETY REDUCTION

• 250-500mcg daily, intranasal (split 2-3 doses) or subcutaneous. 2-4 week cycles. Selank modulates GABA and serotonin systems to provide anxiolytic effects without sedation or dependence associated with benzodiazepines.

• COGNITIVE ENHANCEMENT

• 250-500mcg daily, intranasal. 2-4 weeks. Improves memory consolidation and enhanced learning through modulation of dopamine and norepinephrine systems.

• IMMUNE SUPPORT

• 250-500mcg daily, subcutaneous or intranasal. 2-4 week cycles. The tuftsin-derived sequence provides immunomodulatory benefits, supporting immune function during stress or illness.

• MOOD SUPPORT

• 250-500mcg daily, intranasal (split 2-3 doses). 2-4 week cycles. Selank modulates serotonin and dopamine systems, providing mood stabilization and emotional well-being support without sedation or dependence.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Rare localized irritation if used intranasally

Not Medical Advice

Retatrutide

Retatrutide is a novel triple-hormone receptor agonist targeting GLP-1, GIP, and glucagon receptors simultaneously. By adding glucagon receptor activation to the dual-agonist approach, it enhances energy expenditure and hepatic fat oxidation beyond what GLP-1/GIP agonists achieve alone. Phase 2 trials showed dose-dependent weight loss up to 24% at 48 weeks, with significant reductions in liver fat content (up to 82%), making it particularly promising for metabolic dysfunction-associated steatotic liver disease (MASLD).

Key Benefits

• Highly potent weight loss potential 

• Improved liver fat reduction 

• Appetite suppression 

• Metabolic rate enhancement

Research Dosing Data

Start at 1mg once weekly for the first 4 weeks. If well-tolerated, titrate to 2mg weekly for weeks 5-8, then gradually increase to 4mg, 8mg, and up to 12mg in 4-week intervals based on response. Slow titration helps manage GI side effects. If nausea or digestive issues persist, hold at the current dose before advancing. Administer on the same day each week for consistency. (Not Medical Advice)

Possible Uses & Dosing by Goal

• WEIGHT LOSS

• 1mg weekly, titrating up every 4 weeks to 8-12mg. 6-12+ month protocols. Phase 2 trials demonstrated up to 24% weight loss at 48 weeks. Triple-agonist mechanism provides the most potent weight reduction studied to date.

• LIVER FAT REDUCTION

• 4-12mg weekly. 6+ months. Research shows up to 82% reduction in liver fat content, making it particularly promising for metabolic dysfunction-associated steatotic liver disease (MASLD).

• METABOLIC HEALTH

• 4-8mg weekly. Ongoing use. Glucagon receptor activation enhances energy expenditure and hepatic fat oxidation beyond what GLP-1/GIP agonists achieve alone.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. Keep cold. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nausea 

• Increased heart rate 

• Gastrointestinal upset

Not Medical Advice

PT-141

PT-141 (Bremelanotide) is a synthetic cyclic heptapeptide melanocortin receptor agonist, primarily targeting MC3R and MC4R receptors in the central nervous system. Unlike PDE5 inhibitors that work on blood vessels, PT-141 works directly on neural pathways involved in sexual arousal and desire. It's the first FDA-approved treatment for hypoactive sexual desire disorder (HSDD) in premenopausal women (brand name Vyleesi). Research demonstrates efficacy for both male and female sexual dysfunction through direct CNS activation.

Key Benefits

• Significant increase in libido 

• Effective for both men and women 

• Rapid onset of action

Research Dosing Data

Typical research dose is 1mg to 1.75mg, administered subcutaneously 1-4 hours before intended activity. Start at 0.5mg for the first use to assess tolerance, as nausea is a very common side effect. If well-tolerated, titrate to 1mg, then up to 1.75mg on subsequent uses. Do not exceed 1.75mg per dose or use more than once in 24 hours. Effects can last 12-72 hours. Not recommended for daily use. (Not Medical Advice)

Possible Uses & Dosing by Goal

• LIBIDO ENHANCEMENT

• 1-1.75mg subcutaneous, 1-4 hours before desired effect. As-needed use only (not daily). Start at 0.5mg to assess tolerance. Effects can last 12-72 hours. Works directly on CNS melanocortin pathways rather than vascular mechanisms.

• SEXUAL FUNCTION SUPPORT

• 1-1.75mg subcutaneous, as needed. Do not exceed once per 24 hours. PT-141 is effective for both male and female sexual dysfunction through direct MC3R/MC4R receptor activation in the brain.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nausea (often significant) 

• Flushing 

• Headache

Not Medical Advice

OxyTocin

Oxytocin is a nine-amino acid neuropeptide produced in the hypothalamus and released by the posterior pituitary, often called the 'love hormone' or 'bonding hormone.' Beyond its well-known roles in childbirth and lactation, research reveals oxytocin influences social cognition, trust, empathy, and pair bonding. Emerging studies demonstrate anti-inflammatory properties, wound healing acceleration, metabolic benefits, and potential neuroprotective effects in age-related cognitive decline. It's increasingly studied for its role in healthy aging and social well-being.

Key Benefits

• Promotes social bonding and trust 

• Reduces anxiety and stress 

• Anti-inflammatory effects

Research Dosing Data

Common research doses range from 10 IU to 40 IU via nasal spray or subcutaneous injection. Start at 10 IU to assess response, then titrate up in 10 IU increments as needed. Nasal spray is the most common route of administration. Effects are typically felt within 30-60 minutes. Can be used as needed or on a regular schedule depending on the research goal. Lower doses (10-20 IU) are used for social/bonding research; higher doses for metabolic studies. (Not Medical Advice)

Possible Uses & Dosing by Goal

• SOCIAL BONDING / WELL-BEING

• 10-20 IU via nasal spray, as needed or on a regular schedule. Effects felt within 30-60 minutes. Oxytocin influences social cognition, trust, empathy, and pair bonding through hypothalamic pathways.

• ANXIETY / STRESS REDUCTION

• 10-20 IU nasal spray, as needed. Ongoing use. Research demonstrates anxiolytic effects and stress reduction through central nervous system modulation.

• ANTI-INFLAMMATORY SUPPORT

• 20-40 IU subcutaneous or nasal spray. Regular schedule. Emerging studies demonstrate anti-inflammatory properties, wound healing acceleration, and potential neuroprotective effects in age-related cognitive decline.

• WOUND HEALING

• 20-40 IU subcutaneous or nasal spray. Regular schedule during healing period. Oxytocin accelerates wound healing through anti-inflammatory pathways and promotion of tissue repair, supporting recovery from injuries and surgical procedures.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Nausea 

• Increased heart rate

Not Medical Advice

NAD+

Nicotinamide Adenine Dinucleotide (NAD+) is a critical coenzyme present in every cell, essential for over 500 enzymatic reactions. It serves as the primary electron carrier in mitochondrial energy production and is required by sirtuins (SIRT1-7) and PARPs for DNA repair and epigenetic regulation. NAD+ levels decline approximately 50% between ages 40-60, contributing to metabolic dysfunction and aging. Supplementation research focuses on restoring youthful cellular function, enhancing mitochondrial efficiency, and supporting neurological health.

Key Benefits

• Enhanced cognitive function 

• DNA repair and cellular maintenance

 • Increased energy (ATP production) 

• Anti-aging properties

Research Dosing Data

Common research doses range from 50mg to 200mg, administered 2-3 times per week via subcutaneous or intramuscular injection. Start at 50mg to assess tolerance, as rapid infusion can cause chest tightness and shortness of breath. Titrate up slowly (25-50mg increments per session) based on response. IV infusions use higher doses (250-500mg) but require very slow drip rates (1-3 hours). Some protocols add NAD+ precursors (NMN) on off-days. (Not Medical Advice)

Possible Uses & Dosing by Goal

• COGNITIVE FUNCTION / NEUROPROTECTION

• 100-200mg subcutaneous, 2-3 times weekly. 4-12 week cycles. NAD+ is critical for neuronal energy metabolism and sirtuin-mediated neuroprotection. Often paired with NMN on off-days.

• ENERGY / MITOCHONDRIAL SUPPORT

• 50-100mg subcutaneous, 3 times weekly. Ongoing use. Restores cellular NAD+ levels that decline ~50% between ages 40-60, directly supporting ATP production.

• ANTI-AGING / LONGEVITY

• 100-200mg subcutaneous, 2-3 times weekly. Long-term protocols. Supports sirtuin activation (SIRT1-7) and PARP-mediated DNA repair pathways essential for healthy aging.

• ATHLETIC RECOVERY

• 100-200mg subcutaneous, post-exercise or 2-3 times weekly. 4-8 week cycles. Enhances mitochondrial efficiency and reduces recovery time between training sessions.

Mixing Instructions

Reconstitute with Sterile or Bacteriostatic Water. A typical reconstitution uses 50ml of Sterile or Bacteriostatic Water per 500mg vial, yielding a concentration of 10mg/ml (suitable for IV infusion). Best stored frozen in powder form. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Shortness of breath (if injected too fast) 

• Chest pressure • Nausea

Not Medical Advice

MOTS-C

MOTS-c (Mitochondrial Open Reading Frame of the 12S rRNA-c) is a 16-amino acid peptide encoded within the mitochondrial genome, representing a new class of signaling molecules called mitochondrial-derived peptides (MDPs). It activates AMPK, enhances glucose uptake, improves insulin sensitivity, and promotes fatty acid oxidation. Research shows MOTS-c improves physical capacity and metabolic homeostasis, essentially mimicking the benefits of exercise at the molecular level. Levels decline with age, suggesting a role in metabolic aging.

Key Benefits

• Enhances exercise capacity 

• Promotes fat oxidation 

• Improves insulin sensitivity

Research Dosing Data

Common protocol involves 5mg to 10mg once or twice per week via subcutaneous injection. Start at 5mg once weekly for the first 2 weeks to assess tolerance, then titrate to 5mg twice weekly or 10mg once weekly based on response. MOTS-c mimics exercise benefits at the cellular level, so timing around physical activity may enhance effects. Research cycles typically run 4-8 weeks. (Not Medical Advice)

Possible Uses & Dosing by Goal

• EXERCISE MIMETIC / PERFORMANCE

• 5-10mg once or twice weekly, subcutaneous. 4-8 week cycles. MOTS-c activates AMPK and mimics exercise benefits at the molecular level, improving physical capacity and metabolic homeostasis.

• FAT LOSS

• 5-10mg twice weekly, subcutaneous. 4-8 weeks. Promotes fatty acid oxidation and enhances glucose uptake, supporting body composition improvements alongside training.

• INSULIN SENSITIVITY

• 5mg once or twice weekly, subcutaneous. 4-8 week cycles. Research shows MOTS-c improves insulin sensitivity and metabolic homeostasis. Levels decline with age, suggesting a role in metabolic aging.

• LONGEVITY / ANTI-AGING

• 5-10mg once weekly, subcutaneous. 4-8 week cycles. MOTS-c levels naturally decline with age, and supplementation restores youthful metabolic function, supporting cellular energy production, stress resistance, and overall longevity.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 1ml of Bacteriostatic Water per 10mg vial, yielding a concentration of 10mg/ml. Sensitive to light and heat. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Injection site redness 

• Localized irritation

Not Medical Advice

L-Carnitine

L-Carnitine is a naturally occurring amino acid derivative biosynthesized from lysine and methionine in the liver and kidneys, with the highest tissue concentrations found in skeletal muscle and the heart. Its primary role is transporting long-chain fatty acids across the inner mitochondrial membrane for beta-oxidation (fat burning). As an injectable, L-Carnitine bypasses the poor oral bioavailability (~14-18%) and achieves significantly higher plasma and tissue concentrations. Research covers fat oxidation enhancement, athletic performance and recovery, cardiovascular support, and male fertility improvement through increased sperm motility and count.

Key Benefits

• Enhances fat oxidation (transports fatty acids into mitochondria) 

• Improves athletic performance and exercise recovery • Cardiovascular support — protects cardiac tissue 

• Supports male fertility (sperm motility and count) 

• Reduces muscle damage markers post-exercise

Research Dosing Data

Common injectable research dosages range from 500mg to 2000mg (0.5g to 2g) per session, administered intramuscularly or intravenously. Subcutaneous injection is also used at lower doses (500mg). Start at 500mg per session 2-3 times weekly to assess tolerance, then titrate to 1-2g based on goals. For athletic performance, timing around training sessions (pre or post-workout) is common. For fertility protocols, 1-2g 3x weekly over 12+ weeks. IV administration requires slow infusion rate to avoid GI discomfort. (Not Medical Advice)

Possible Uses & Dosing by Goal

• FAT OXIDATION / WEIGHT MANAGEMENT

• 1-2g IM or IV, 2-3 times weekly. 8-12 week protocols. L-Carnitine directly enables mitochondrial fat transport for beta-oxidation. Injectable forms provide superior bioavailability over oral supplementation.

• ATHLETIC PERFORMANCE / RECOVERY

• 1-2g IM, pre or post-workout, 3 times weekly. 4-8 week cycles. Research shows reduced exercise-induced muscle damage markers (CK, lactate), improved oxygen uptake, and faster recovery between training sessions.

• CARDIOVASCULAR SUPPORT

• 1-2g IV or IM, 2-3 times weekly. 8-12 weeks. Carnitine is essential for cardiac energy metabolism — research demonstrates cardioprotective effects, improved exercise tolerance in cardiac patients, and support for heart muscle function.

• MALE FERTILITY

• 1-2g subcutaneous or IM, 3 times weekly. 12-24 week protocols. Research shows improvements in sperm motility, count, and morphology, particularly in men with idiopathic infertility or varicocele-related subfertility.

• MUSCLE PRESERVATION

• 1g IM or IV, 3 times weekly during caloric restriction. 8-12 weeks. L-Carnitine helps preserve lean mass during weight loss by optimizing fat as the primary energy source, sparing muscle glycogen and protein.

Mixing Instructions

L-Carnitine injectable is typically supplied as a pre-mixed sterile solution (commonly 200mg/ml or 500mg/ml) in multi-dose vials — no reconstitution required. If supplied as lyophilized powder, reconstitute with Sterile Water for Injection at a 1mL per 10mg ratio (yielding 10mg/ml). Draw the desired dose using a standard syringe; for IM injection, use an appropriate needle length for the target muscle. For IV use, further dilute in normal saline and infuse slowly over 15-30 minutes. Store at room temperature, protected from light.

Possible Side Effects

• Mild nausea if injected too rapidly 

• Injection site discomfort 

• Fishy body odor (more common with oral forms) 

• Rare GI upset

Not Medical Advice

Kisspeptin-10

Kisspeptin-10 is a 10-amino acid C-terminal fragment of the 54-amino acid kisspeptin-54, representing the minimum sequence required for full biological activity. Kisspeptins are the most potent known activators of the hypothalamic GnRH neurons, acting as the master switch for reproductive hormone cascades. Administration triggers robust, dose-dependent LH and FSH pulses. Research applications include fertility support, HPTA axis recovery, and understanding reproductive endocrinology. Its upstream position in the HPG axis allows for complete hormonal cascade activation.

Key Benefits

• Supports natural hormone production 

• Enhances libido 

• Useful in post-research recovery protocols

Research Dosing Data

Common research doses range from 100mcg to 500mcg, administered subcutaneously. Start at 100mcg to assess hormonal response, then titrate up in 100mcg increments based on LH/FSH bloodwork. Effects are typically acute (within hours), making it suitable for on-demand or short-cycle protocols. Some researchers use it as part of HPTA recovery protocols after hormonal suppression. Cycles vary based on research goals. (Not Medical Advice)

Possible Uses & Dosing by Goal

• HORMONE SUPPORT / LH/FSH STIMULATION

• 200-500mcg subcutaneous, as needed or on protocol schedule. Kisspeptin-10 is the most potent known activator of GnRH neurons, triggering robust, dose-dependent LH and FSH pulses within hours.

• FERTILITY SUPPORT

• 100-300mcg subcutaneous, timed with fertility protocols. Kisspeptin activates the full reproductive hormone cascade from its upstream position in the HPG axis.

• HPTA RECOVERY

• 200-500mcg subcutaneous, as part of post-cycle recovery protocols. 2-4 week cycles. Its upstream position allows for complete hormonal cascade activation to help restore natural function.

• LIBIDO ENHANCEMENT

• 00-300mcg subcutaneous, as needed. Kisspeptin-10 activates the full reproductive hormone cascade including LH and testosterone, which naturally supports libido and sexual function through physiological hormone optimization.

Mixing Instructions

Standard reconstitution with Bacteriostatic Water. A typical reconstitution uses 0.5ml of Bacteriostatic Water per 5mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Temporary skin flushing 

• Mild nausea

Not Medical Advice

Hexarelin

Hexarelin is a synthetic hexapeptide growth hormone secretagogue (GHS) that acts as a potent agonist of the ghrelin receptor (GHS-R1a). It is among the most potent GHRPs (Growth Hormone Releasing Peptides) studied, producing strong and consistent GH pulses from the pituitary gland. Uniquely, Hexarelin also directly activates cardiac-specific receptors (CD36) independent of GH release, making it notable for cardiovascular protection research. Unlike Ipamorelin, Hexarelin stimulates cortisol and prolactin alongside GH, which distinguishes it from more selective options but also contributes to its potency profile. Research has also explored its effects on tendon strength, bone density, and anabolic tissue support.

Key Benefits

• Potent GH release — strongest of the GHRPs 

• Cardiac protection via direct CD36 receptor activation 

• Supports muscle growth and fat loss 

• Tendon and bone density support 

• Neuroprotective properties

Research Dosing Data

Common research dosages range from 100mcg to 200mcg per injection, administered 1-3 times daily. Start at 100mcg once daily to assess cortisol and prolactin response. Many protocols use 100-200mcg 3x daily for maximum GH stimulation. Administer subcutaneously on an empty stomach or immediately upon waking for best GH response. Avoid prolonged use as GH blunting (desensitization) is more pronounced with Hexarelin than other GHRPs. Research cycles typically run 6-12 weeks followed by a break. (Not Medical Advice)

Possible Uses & Dosing by Goal

• GROWTH HORMONE OPTIMIZATION

• 100-200mcg subcutaneous, 2-3 times daily. 6-12 week cycles. Hexarelin is the most potent GHRP — produces the strongest GH pulses studied, but also elevates cortisol and prolactin alongside GH.

• CARDIAC PROTECTION

• 100mcg subcutaneous, once or twice daily. 4-8 week cycles. Unique among GHRPs — Hexarelin activates cardiac CD36 receptors directly, independent of GH release, demonstrating cardioprotective and anti-fibrotic effects in research models.

• MUSCLE GROWTH / BODY COMPOSITION

• 100-200mcg subcutaneous, 2-3 times daily on empty stomach. 8-12 week cycles. Potent GH release drives IGF-1 production, supporting lean mass accretion and fat oxidation.

• TENDON / BONE DENSITY

• 100mcg subcutaneous, once daily. 8-12 weeks. GH-mediated IGF-1 elevation supports collagen synthesis in tendons and osteoblast activity for improved bone mineral density.

• FAT LOSS

• 100-200mcg subcutaneous, 2-3 times daily. 8-12 week cycles. GH stimulation directly promotes lipolysis and inhibits fat storage. Best results with fasted administration and caloric management.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.2ml of Bacteriostatic Water per 2mg vial, yielding a concentration of 10mg/ml. Swirl gently — do not shake or vortex. Store reconstituted vial refrigerated (2–8°C). Hexarelin is relatively stable after reconstitution — use within 30-60 days. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Cortisol elevation (distinguishes it from Ipamorelin) 

• Prolactin elevation 

• Increased appetite and hunger 

• Water retention at higher doses 

• Injection site discomfort

Not Medical Advice

FST-344

Key Benefits

• Significant muscle mass increases 

• Myostatin inhibition 

• Improved recovery

Research Dosing Data

Common research protocols involve 100mcg daily for shorter cycles, or 1mg every 10 days for extended protocols. Start at 50mcg daily for the first few days to assess tolerance before titrating to 100mcg. Due to its extreme potency, precise dosing is critical. Cycles typically run 10-30 days. Some researchers use a loading protocol of 100mcg daily for 10 days followed by a break. (Not Medical Advice)

Possible Uses & Dosing by Goal

• MUSCLE GROWTH / HYPERTROPHY

• 100mcg daily for 10-30 days. Follistatin-344 binds and neutralizes myostatin, removing the natural brake on muscle development. Due to extreme potency, precise dosing is critical.

• MYOSTATIN INHIBITION

• 100mcg daily for 10 days, followed by a break. Or 1mg every 10 days for extended protocols. Research shows dramatic increases in skeletal muscle mass through myostatin and activin neutralization.

• BODY COMPOSITION / FAT LOSS

• 100mcg daily for 10-30 days. By dramatically increasing lean muscle mass through myostatin inhibition, FST-344 indirectly enhances basal metabolic rate and promotes favorable body composition changes including fat reduction.

Mixing Instructions

Reconstitute with Bacteriostatic Water. A typical reconstitution uses 0.1ml of Bacteriostatic Water per 1mg vial, yielding a concentration of 10mg/ml. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Temporary joint stiffness • Increased appetite

Not Medical Advice

NAD+

Nicotinamide Adenine Dinucleotide (NAD+) is a critical coenzyme present in every cell, essential for over 500 enzymatic reactions. It serves as the primary electron carrier in mitochondrial energy production and is required by sirtuins (SIRT1-7) and PARPs for DNA repair and epigenetic regulation. NAD+ levels decline approximately 50% between ages 40-60, contributing to metabolic dysfunction and aging. Supplementation research focuses on restoring youthful cellular function, enhancing mitochondrial efficiency, and supporting neurological health.

Key Benefits

• Enhanced cognitive function • DNA repair and cellular maintenance • Increased energy (ATP production) • Anti-aging properties

Research Dosing Data

Common research doses range from 50mg to 200mg, administered 2-3 times per week via subcutaneous or intramuscular injection. Start at 50mg to assess tolerance, as rapid infusion can cause chest tightness and shortness of breath. Titrate up slowly (25-50mg increments per session) based on response. IV infusions use higher doses (250-500mg) but require very slow drip rates (1-3 hours). Some protocols add NAD+ precursors (NMN) on off-days. (Not Medical Advice)

Possible Uses & Dosing by Goal

• COGNITIVE FUNCTION / NEUROPROTECTION

• 100-200mg subcutaneous, 2-3 times weekly. 4-12 week cycles. NAD+ is critical for neuronal energy metabolism and sirtuin-mediated neuroprotection. Often paired with NMN on off-days.

• ENERGY / MITOCHONDRIAL SUPPORT

• 50-100mg subcutaneous, 3 times weekly. Ongoing use. Restores cellular NAD+ levels that decline ~50% between ages 40-60, directly supporting ATP production.

• ANTI-AGING / LONGEVITY

• 100-200mg subcutaneous, 2-3 times weekly. Long-term protocols. Supports sirtuin activation (SIRT1-7) and PARP-mediated DNA repair pathways essential for healthy aging.

• ATHLETIC RECOVERY

• 100-200mg subcutaneous, post-exercise or 2-3 times weekly. 4-8 week cycles. Enhances mitochondrial efficiency and reduces recovery time between training sessions.

Mixing Instructions

Reconstitute with Sterile or Bacteriostatic Water. A typical reconstitution uses 50ml of Sterile or Bacteriostatic Water per 500mg vial, yielding a concentration of 10mg/ml (suitable for IV infusion). Best stored frozen in powder form. You can adjust the water volume based on desired concentration: more water = lower concentration (easier to measure small doses); less water = higher concentration (smaller injection volumes). Use our calculator to determine exact units.

Possible Side Effects

• Shortness of breath (if injected too fast) • Chest pressure • Nausea

Not Medical Advice